Coventry Die Head Chasers - 5/32" Witworth 32TPI

[LexD]

Anyone have a spare set of these to suit a 1/2" diehead?
I am also still looking for a set of 1/4" unf left hand to suit the same head

[BaronJ]

Hi Lex,

This is the only place that I know of ! At one time I could go into Sheffield UK and buy all sorts of tools. Sadly most of them have gone !

https://www.tracytools.com/product-c...taps-and-dies/

[LexD]

Thanks John, I can get a new set here from Goliath but I am really after a used set, even if they are a bit blunt I can sharpen them.

[snapatap]

there is a good chance i have a 5/32 set i just wont have time to look until the weekend.

[LexD]

That would be great, thanks Ash. Would you also have a look for a set of 6-32 UNC please.

[snapatap]

chasers 1.jpgchasers 2.jpg

[LexD]

Thanks Ash, they will probably be OK after a bit of a tidy up, I will PM you to arrange delivery.