Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2020
    Location
    Austinmer
    Posts
    2

    Default Hercus 9 Model C identification

    Hi All,
    I've finally looked at a Hercus lathe that has been sitting in my garage for a number of years and was hoping the forum can help with identifying what I actually have. I can see on the Screw Threads and Power Feeds plate that is it a model C machine number 3589. I've also looked at the bed and tailstock and the serial on these shows as C9819. I've attached a couple of photos with the serial numbers.

    I've looked through the forum and it looks like the machine number 3589 would mean that is was made in 1951 and then the serial number of 9819 is 1965. Does that mean the lathe has been put together with parts or is it just the bed and tailstock number that show when the machine was manufactured?

    Thanks,
    Richard
    Attached Images Attached Images

  2. #2
    Join Date
    Aug 2015
    Location
    Adelaide
    Posts
    89

    Default

    Hi Richard

    I would be working from the bed number, I would say that the cover has been replaced at some time, if it was built in 1951 then the reverse tumbler would only have a locking bolt and not the spring loaded plunger among a few other small differences.

  3. #3
    Join Date
    Dec 2019
    Location
    Terang
    Age
    61
    Posts
    2

    Default In the process of restoring a model c

    Hi Richard
    I have been working on restoring a model C for a couple of months now and just waiting for repaired gears and replacement parts to arrive. I see yours has a v belt and is an 8 speed, nice. Mine is a flat belt 6 speed.
    it seems slightly different
    Attached Images Attached Images

Similar Threads

  1. Hercus Model 0 WTB ( or Adcock & shipley model 0)
    By bezzastv in forum WANTED TO BUY
    Replies: 0
    Last Post: 14th Aug 2019, 08:21 AM
  2. Model A Apron on Model C Hercus Lathe?
    By TommyGMachining in forum THE HERCUS AREA
    Replies: 4
    Last Post: 17th Dec 2018, 09:11 AM
  3. Newly Acquired old Bench Grinder model identification..
    By lamestllama in forum METALWORK GENERAL
    Replies: 43
    Last Post: 26th Sep 2018, 07:39 PM
  4. Hercus T&C Grinder accessory identification.
    By lamestllama in forum THE HERCUS AREA
    Replies: 10
    Last Post: 21st Oct 2017, 09:51 AM
  5. Hercus identification please
    By mañana in forum THE HERCUS AREA
    Replies: 4
    Last Post: 16th Aug 2011, 06:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •