Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2019
    Location
    Sydney, Australia
    Age
    52
    Posts
    10

    Default Hercus lathe refurb in Revesby: week 1

    Hi guys(*). My friend Barry gave me a pile of parts from his garage floor – most of a Hercus C lathe!
    ( bed & gear cover are C7967, tailstock says 6330, can't find any other serial numbers )


    There is of course a story. I gave him my Dad's old Hercus about 4 years ago, which he fixed up and gave to his brother.
    That old thing had no pinion or feed, and flat belt pulleys. He bought this lathe in a hurry from a school or reseller,
    for parts, and then at leisure bought a "new" backgear, apron, et c.


    So:

    • Wednesday was unload parts from car and see what was missing: IMG_1365.jpg
    • Thursday, heated up a big degreasing tank and soaked most parts, which removed the horrible flaking blue paint: IMG_1367.jpg
      IMG_1368.jpg IMG_1369.jpg Sadly, it also removed most paint from the gear chart. Should have removed the pins and kept that aside
      (and my factory neighbour had a go at the worst of the grooves/nicks on the bed with a file)


    • Saturday, paint some black RustStop paint on bed, headstock, gear cover, and bango+guard: IMG_1371.jpgIMG_1370.jpg
    • Tuesday, felts and slides off saddle, inspect that, decide to post you guys



    To do:
    • Build a base of some sort. Can't afford a real lathe cabinet (even though Hafco has them for $330).
      Thinking about welding up some plates and beams, but given overall state of lathe,
      it will never be super-accurate, so maybe a waste of time & steel.
    • Borrow a good straight-edge, find a wet stone, and finish filing/polishing the bed.
      (saddle seems reasonable, but one flat is C-channel shape - just like the bed Vs were)
    • Spend hours measuring and shimming. I don't have any centres for the tail, so this will be tricky



    Questions:
    1. Does anyone have one V felt retainer and bolt (set screw)?
      Yes, I know I can buy a set of 4, but that is overkill.
    2. Looking at the reverse gear setup, I'm wondering if it is worth it.
      A reversing switch on the 3phase motor, and removing the bull gear, seems so much neater?
    3. I can't afford regrinding, but can still try my best.
      Does anyone know if the grinders tension down the middle?
      ( like Hercus factory used to – I assume to counteract future cutting pressure when lathe is used )



    * I'm guessing there are no ladies here, although with a name like HERcus maybe there should be
    Last edited by nigelpearson; 14th Aug 2019 at 06:54 AM. Reason: adding pictures, minor edits

  2. #2
    Join Date
    Oct 2011
    Location
    Norwood-ish, Adelaide
    Age
    54
    Posts
    5,222

    Default

    And down the rabbit hole we go!

    You potentially have a large task ahead of you. With regard to your questions,
    1. If you send me a PM with your address, I have some felt here that you could cut a couple of wipers from. It is probably worth replacing all the wipers. Who knows how long the others have been on or what condition they are in. Find your local industrial fastener place. If you take a bolt in they can probably match it.
    2. The reversing gear is to reverse the direction of the lead screw - so while the chuck is still turning in the 'normal' direction, reversing the leadscrew will feed the carriage in the opposite direction. I would not remove it as it it comes in handy for cutting LH threads and other tasks. A VFD won't solve all your speed/ control problems. The speed range on the lathe is probably 20:1 or more. A VFD won't do that, so think carefully about how you plan on keeping that versatility. Most people wish they had more speeds on their lathe...
    3. Lathe beds are scraped to get the right flatness. Grinding is only the first step (do a search on the forum, as scraping is a regular topic). If the bed has been attacked with a file it may be cactus, in which case a donor bed may be a better move (nicks and burrs are stoned off).Occasionally they show up in the ads, when someone is parting out a lathe. In a shameless piece of self promotion, I have a Sheraton bed (same shape as the Hercus) that is surplus to my immediate needs (https://metalworkforums.com/f223/t202579-surplus-stuff)


    Michael

  3. #3
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    28

    Default

    Havenít posted here for so long, feel a bit shameful about that.
    Just following along as one day I would like to restore my own Hercus lathe.
    So hopefully this will be a good primer.

    Cheers Matt.

Similar Threads

  1. New Hercus user in Revesby, Sydney
    By nigelpearson in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 4
    Last Post: 11th Aug 2019, 06:56 PM
  2. Hercus 260 tailstock quill - replace or refurb?
    By MosquitoGarage in forum THE HERCUS AREA
    Replies: 37
    Last Post: 20th Jun 2019, 10:46 PM
  3. Hercus hacksaw refurb - pic thread
    By StrayAlien in forum METALWORK GENERAL
    Replies: 6
    Last Post: 18th Jun 2019, 09:29 AM
  4. An airgun refurb...
    By johnbaz in forum GUNSMITHING
    Replies: 20
    Last Post: 2nd Sep 2016, 10:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •