My New Shed project

[markgray]

IMG_2435.jpg

VDGB9241.jpg And then the door went in. Ended up slightly short (about 200mm) of corrugated iron but have ordered another piece so will fix it then.

Getting close

Mark

[markgray]

IMG_2440.jpg

IMG_2441.jpg

IMG_2442.jpg
IMG_2443.jpg

Some of the machines in the shed. Partially unwrapped but not cleaned and still to be moved to their final positions.

[markgray]

Lots of little jobs left now.

IMG_2446.jpg Simple locking mechanism for main door. Guides for the doors have also been cemented in

IMG_2444.jpg Making and painting the sliding internal door that will go in the walkway between the two sheds.

Still have some flashing to do,downpipes and will cement something under the main door but I'm sure some other things but can almost see the finish line now


This weekend off to Sydney to collect a Thiel 132 conturex shaper (thanks Andre). Obsolete but very cool !!
Pictures later


Mark

[markgray]

So the shed build continues between work and family duties.

The external shed is basically finished.

Had to put a tank in. Ended up choosing a steel liner tank 110,000 L in size. Now all plumbed in and collecting water!

Next was insulating the walls of the shed. Will take about 650 panels to finish. Each has to be cleaned, painted and cut to size. A very slow and arduous job but hopefully worth it in the end.

IMG_2466.jpg Here a picture of the first ones going in. As of today only have about 75 left to go.

Have cut and baled hay for the first time in 3 years so have to clean out the hay shed of some of the stored machines.

IMG_2451.jpg Brown and sharpe gear automatic gear cutting machine

IMG_2478.jpg IMG_2480.jpg HLV-H lathe (does anyone know why it always puts photos on the side?). This is a metric version. Can talk more about it later.

Really looking forward to getting everything in the shed and working.

Cheers

Mark

[BaronJ]

Hello Mark,

You need to edit your pictures and re-save them !

The problem is the "EXIF" data that is stored with your picture, editing and saving will/should remove it, then the server at the forum cannot try to put the picture the same way up as the camera when the picture was taken.

[YBAF]

He, I reckon it would take a fair old Willy-Willy to blow over that shed..




.