Search:
Type: Posts; User: gazza2009au
Search: Search took 0.03 seconds.
-
20th Mar 2024, 05:44 AM
- Replies
- 30
- Views
- 1,185
I started to build this homemade boat fuel tank...
I started to build this homemade boat fuel tank it was only around 500mm wide the material was bendable 2.5mm aluminium, if you were to make a 1800mm wide similar bender you can run a series of holes...
-
18th Mar 2024, 09:55 PM
Thread: Nifty little homemade mag drill mill
by gazza2009au- Replies
- 11
- Views
- 712
Problem with that is it's a morse taper shaft so...
Problem with that is it's a morse taper shaft so any side movement it will just fall out
-
18th Mar 2024, 06:14 PM
- Replies
- 27
- Views
- 1,055
I'm not to sure they are just RCD...
I'm not to sure they are just RCD switches/breakers which are resettable, one for stove and another for the big A/C
-
18th Mar 2024, 03:51 PM
- Replies
- 42
- Views
- 1,747
Still getting the hang of welding in awkward...
Still getting the hang of welding in awkward position's, today i tacked on a piece of 5mm flat bar to possibly 1.6mm round tubing, at first i had set the EWM to 30amp i was sure i was going to blow...
-
18th Mar 2024, 02:41 AM
Thread: Nifty little homemade mag drill mill
by gazza2009au- Replies
- 11
- Views
- 712
Looking around the internet u can get a 3/4"...
Looking around the internet u can get a 3/4" weldon shank to fit the mag drill with a 1/2" 20 UNF threaded section to fit a er16 collet
-
18th Mar 2024, 02:33 AM
- Replies
- 27
- Views
- 1,055
I had something like this a couple day's ago i...
I had something like this a couple day's ago i had the main dinning room/lounge room 5kw air con going and turned the stove on and it shut the air con off even tho there are two RCD's thinking the...
-
18th Mar 2024, 02:27 AM
Thread: Nifty little homemade mag drill mill
by gazza2009au- Replies
- 11
- Views
- 712
Karl in the video he removes the magnet and...
Karl in the video he removes the magnet and bolt's the mag drill to the frame using the magnet mounting hole's
-
17th Mar 2024, 01:22 AM
Thread: Nifty little homemade mag drill mill
by gazza2009au- Replies
- 11
- Views
- 712
Nifty little homemade mag drill mill
I have been seeing mill's and lathe, drill, mill machines come up for sale just missed a lathe, mill, drill machine for $100 just did'nt think i would be able to carry it or move it, another one was...
-
14th Mar 2024, 02:59 AM
Thread: Looking for gal PFC 75x40 Sydney
by gazza2009au- Replies
- 28
- Views
- 3,617
Actually i just checked on the Edcon Steel...
Actually i just checked on the Edcon Steel website i estimated 6 meters of 50x50x3mm shs it's showing 25.5kg that's just over $100 to galvanize at $4 per kilo to galvanize
I will go this option... -
14th Mar 2024, 02:48 AM
Thread: Looking for gal PFC 75x40 Sydney
by gazza2009au- Replies
- 28
- Views
- 3,617
Yeah it's Duragal i have been told HDG only comes...
Yeah it's Duragal i have been told HDG only comes in heavier steel length's, i can go upto 75x75x3mm that's if i can find it in HDG, main chassis is 100x50mm so it should'nt look to awkward, at $4 a...
-
10th Mar 2024, 10:40 PM
- Replies
- 42
- Views
- 1,747
Yeah i will likely be peddling up hill's that's...
Yeah i will likely be peddling up hill's that's ok with assistance, i have read these MY1016 250w motor's arenot rated for continous duty cycle so i will have to go easy on it especilly if i need to...
-
10th Mar 2024, 10:33 PM
Thread: Looking for gal PFC 75x40 Sydney
by gazza2009au- Replies
- 28
- Views
- 3,617
Hey guys what are my option's for cross member's...
Hey guys what are my option's for cross member's
All i can find in 50x50x3mm is pre galvanised but it's not hot dipped galvanized, i really need to keep my GVM under 749kgs, old trailer rego paper... -
9th Mar 2024, 05:36 AM
- Replies
- 42
- Views
- 1,747
Who want's to peddle tho lol
Who want's to peddle tho lol
-
9th Mar 2024, 12:03 AM
- Replies
- 42
- Views
- 1,747
Just lost my reply lost internet connection,...
Just lost my reply lost internet connection, sprocket's range about 54T-92T 92 is the biggest i have found so i will be ordering that, according to the link's above in there calculator's the speed...
-
6th Mar 2024, 01:56 PM
- Replies
- 42
- Views
- 1,747
It would be the same thing tho Droog diameter of...
It would be the same thing tho Droog diameter of x and x sprocket be it teeth or diameter both will work on a ratio
-
6th Mar 2024, 12:08 PM
- Replies
- 42
- Views
- 1,747
Thank's for the link that website is awesome ...
Thank's for the link that website is awesome
According to the calculation my new 250watt motor will take 4.6mins to ride 1km up my street which is 3% grade at 13kph, 30 meter's rise over 1km,... -
5th Mar 2024, 10:19 PM
- Replies
- 42
- Views
- 1,747
I'm doing some circumference and ratio...
I'm doing some circumference and ratio calculation's using a calculator so i'm probably all wrong
25mm diameter main drive sprocket
500mm wheel spocket
Equils 20:1 ratio
0.9n.m at 20:1 = 18n.m... -
5th Mar 2024, 07:26 PM
- Replies
- 42
- Views
- 1,747
That link trying to figure out the ratio to put...
That link trying to figure out the ratio to put in the ratio is 1:6.33 when i add that number the calculatir reset's to 1, when i add a ratio of 6 i get 5.4N.M
-
4th Mar 2024, 10:27 PM
- Replies
- 42
- Views
- 1,747
I ordered a new kit which includes one of these...
I ordered a new kit which includes one of these MY1016 motor's, any idea how to calculate the torque output
... -
3rd Mar 2024, 04:01 PM
- Replies
- 42
- Views
- 1,747
Just ran the test again it settles down to 21amp,...
Just ran the test again it settles down to 21amp, for me to get any power out of this starter i'm not sure if it will be practicle, legal limit is 200watts for a Ebike this little motor pump's out...
-
3rd Mar 2024, 01:00 AM
- Replies
- 42
- Views
- 1,747
Just spun up the motor using the watt meter...
Just spun up the motor using the watt meter battery was reading 11volt watt meter read 24amp 239watts only tested it for 3-4 second's, i will charge battery soon and get some stable number's
-
1st Mar 2024, 09:07 PM
- Replies
- 42
- Views
- 1,747
Took 10min to remove the front wheel and fit a...
Took 10min to remove the front wheel and fit a rear wheel to the front fork
https://ibb.co/qr3PVDK -
1st Mar 2024, 05:51 PM
- Replies
- 2
- Views
- 264
NSW Sorry Kryn i just seen your post, I sold the chop...
Sorry Kryn i just seen your post, I sold the chop saw 2 day's ago, bugger
-
28th Feb 2024, 07:10 PM
- Replies
- 42
- Views
- 1,747
I thought about a clamp meter after i had...
I thought about a clamp meter after i had purchased the watt meter bugger
Anyway i just picked up a bike just a BMX shagged old thing from market place for $30 tried to buy a rear wheel to place... -
28th Feb 2024, 01:01 AM
- Replies
- 42
- Views
- 1,747
Thank's guy's, If i rewire it i will unwind the...
Thank's guy's, If i rewire it i will unwind the armature and measure the total length of wire x the thickness and look up the Ohms spec's and pick a new wire and x diameter
The starter is for a... -
27th Feb 2024, 01:27 AM
- Replies
- 42
- Views
- 1,747
Thank's :2tsup:, i pulled the motor apart again...
Thank's :2tsup:, i pulled the motor apart again and measured the wire diameter it measured 0.40mm x 5T, wound around every 1 and 4 poles, there are 16 poles, i done a little reaserch looking for...
-
26th Feb 2024, 08:34 PM
- Replies
- 42
- Views
- 1,747
As soon as i receieved the starter last week i...
As soon as i receieved the starter last week i opened it up to check the winding's, i have no problem rewinding the armature i just don',t know how many turn's and what thickness wire to use
It... -
25th Feb 2024, 08:42 PM
- Replies
- 42
- Views
- 1,747
It's a brush motor so i need to keep it at 12...
It's a brush motor so i need to keep it at 12 volt's it's rated 50amp but i won't need that huge amount of power, 10-15amp possibly up to 20amp should be sufficient
Thought about rewinding the... -
25th Feb 2024, 06:17 PM
- Replies
- 42
- Views
- 1,747
How to regulate current on a 12volt circuit
Hey guy's how do i regulate current on a 12volt circuit to lower the speed of a electric motor?
It's a starter motor i was going to rewind but hooked up a multimeter to test current and noticed it... -
23rd Feb 2024, 10:38 PM
- Replies
- 2
- Views
- 264
NSW Mini 6in Chop Saw, Pipe/Bar Vice, Canley Heights
Mini 6 inch chop saw look's rough as it sat out in the garden shed for 7 year's, got a workout once or twice a year, very easy to carry, takes a 150x2.5x22mm cutting disc available from bunnings, has...
-
12th Feb 2024, 10:46 PM
Thread: Soldering Hole in Steel?
by gazza2009au- Replies
- 13
- Views
- 1,252
Thank's for that link my local welding shop...
Thank's for that link my local welding shop sell's them by the stick or kg :2tsup: will give those a try
-
12th Feb 2024, 04:25 PM
Thread: Soldering Hole in Steel?
by gazza2009au- Replies
- 13
- Views
- 1,252
Droog those cold gal paint's never work on...
Droog those cold gal paint's never work on saltwater boat trailers a plan was to use tefgel but i may still use tefgel along with soldering the hole to seal the steel
Trying to avoid adding extra... -
12th Feb 2024, 02:28 PM
Thread: Soldering Hole in Steel?
by gazza2009au- Replies
- 13
- Views
- 1,252
Thank's China, i was'nt sure if solder would...
Thank's China, i was'nt sure if solder would stick to steel :2tsup:
-
11th Feb 2024, 11:03 PM
Thread: Soldering Hole in Steel?
by gazza2009au- Replies
- 13
- Views
- 1,252
Soldering Hole in Steel?
Hey Guy's, Can i drill a 13mm hole in steel than solder around the rim of the hole using a blow torch without burning off the galvanize? Hole will be redrilled to 12mm-12.5mm just need to keep the...
-
11th Feb 2024, 07:51 PM
Thread: Minimise/prevent warping
by gazza2009au- Replies
- 6
- Views
- 424
If weld need's to be tidy can u just key the bar...
If weld need's to be tidy can u just key the bar and slot the flat bar into the round bar? I have seen lot's of people cut key slot's on the lathe
-
10th Feb 2024, 10:33 PM
Thread: Looking for gal PFC 75x40 Sydney
by gazza2009au- Replies
- 28
- Views
- 3,617
Video guy's...
Video guy's https://youtu.be/lfUdtorsT3Q?si=bfPRxJRICR0jWQm8
-
10th Feb 2024, 10:31 PM
Thread: Looking for gal PFC 75x40 Sydney
by gazza2009au- Replies
- 28
- Views
- 3,617
Video Guy's, Not a professional video but giving...
Video Guy's, Not a professional video but giving it a go
https://youtu.be/lfUdtorsT3Q?si=bfPRxJRICR0jWQm8 -
10th Feb 2024, 12:10 AM
Thread: Looking for gal PFC 75x40 Sydney
by gazza2009au- Replies
- 28
- Views
- 3,617
I need 1370mm on the outsides of the main chassis...
I need 1370mm on the outsides of the main chassis to fit my old trailer axle and spring hanger's with that i need a 90mm wide drawbar it's just the sweet spot the steel beam's rested at, i don't...
-
9th Feb 2024, 06:30 PM
Thread: Looking for gal PFC 75x40 Sydney
by gazza2009au- Replies
- 28
- Views
- 3,617
Was tempted to use left over PFC 100x50mm C...
Was tempted to use left over PFC 100x50mm C channel for the drawbar but i will get a length of 100x100x3mm gal tubing for the drawbar so there's no twisting when i turn corner's
-
9th Feb 2024, 04:45 PM
Thread: Looking for gal PFC 75x40 Sydney
by gazza2009au- Replies
- 28
- Views
- 3,617
Main frame is bent and cut to size, one side is...
Main frame is bent and cut to size, one side is sitting lower on the grass and the otherside is sitting on the concrete so it appear's one side is twisted but they are both bent straight
-
8th Feb 2024, 08:08 PM
Thread: Looking for gal PFC 75x40 Sydney
by gazza2009au- Replies
- 28
- Views
- 3,617
Hey guy's i got my 4x bend's made, the two bend's...
Hey guy's i got my 4x bend's made, the two bend's bending away from the flange turned out perfect, the two bend's bending towards the flange not so great 1 set of flanges bent out the other piece...
-
7th Feb 2024, 10:05 PM
Thread: Looking for gal PFC 75x40 Sydney
by gazza2009au- Replies
- 28
- Views
- 3,617
I put a little more bend into the first bend on...
I put a little more bend into the first bend on the length than proceeded to make the second bend it was late about 6:30-7pm dropped a few pieces of steel and only cracked it once and said "" out...
-
2nd Feb 2024, 10:09 PM
Thread: Upload Speed?
by gazza2009au- Replies
- 1
- Views
- 537
Upload Speed?
Has admin reduced my upload speed it's taking 1min per 1mb to upload, happy to stop posting if that's the case
Over 20min's to upload 3 picture's -
2nd Feb 2024, 10:06 PM
Thread: Looking for gal PFC 75x40 Sydney
by gazza2009au- Replies
- 28
- Views
- 3,617
Some pic's of the bend's, no galvanize cracking...
Some pic's of the bend's, no galvanize cracking yet
-
2nd Feb 2024, 08:18 PM
Thread: Vernier callipers
by gazza2009au- Replies
- 39
- Views
- 2,187
I just checked my vernier caliper is off by...
I just checked my vernier caliper is off by 00.20mm
-
2nd Feb 2024, 07:50 PM
Thread: Vernier callipers
by gazza2009au- Replies
- 39
- Views
- 2,187
I use to buy digital calipers of ebay than got...
I use to buy digital calipers of ebay than got sick of the reading jumping all over the place so bought a bunning's digital caliper that to was junk, so i bought a hare and forbes cheapie digital...
-
2nd Feb 2024, 06:20 PM
Thread: Looking for gal PFC 75x40 Sydney
by gazza2009au- Replies
- 28
- Views
- 3,617
Success so far guy's i need to run a few more...
Success so far guy's i need to run a few more degree's on the bend's to bring the drawbar end's crossing each other at 4500mm from the back foward, than i will need to kick out the two front A frame...
-
1st Feb 2024, 12:19 AM
Thread: Things I have on Gumtree
by gazza2009au- Replies
- 1
- Views
- 324
AEG is really nice quality i bought a 12volt...
AEG is really nice quality i bought a 12volt impact drill 7 year's ago 4ah battery, from cash converter's online, i charge it once every 6 months when not in use and i have never needed to replace...
-
31st Jan 2024, 10:43 PM
- Replies
- 15
- Views
- 805
I signed the lease just under 4 week's ago it...
I signed the lease just under 4 week's ago it took me a full 2 week's to move everything so while all my power tool's where here i was still living at my old place that's the reason the corner of the...
-
31st Jan 2024, 06:28 PM
- Replies
- 15
- Views
- 805
Droog it was'nt just about the tool's, She was...
Droog it was'nt just about the tool's, She was saying to get a table with chair's and a coffee table and that i did'nt need to throw out the lounge...
She want's me to live her life style...