Search:

20 amp breakers sounds Ok
How far is the workshop from the house or more precisely how long is the cable run from the supply switchboard to the workshop outlet?
Regards Whitworth

Generally you cant have too much power to feed to a welder.
Lincoln State only 10.7 amps input. However you must factor in how far your workshop is from your powerboard. If it is a long way there...

David,
Your Question fits well into "The Absolute definition of Optimism" category.
Try Solid works or Autodesk inventor for the design work.
Or maybe try Linux draughting packages.
How is china...

Bob those Pizza's look very good. Just be careful you dont break out with a health rash.
The best wood fires have dampers and convolute flame path.
The inlet air damper and exit (flue)damper are...

Bob,
Please email me the top an bottom diameters plus the length of your chimney adapter cone frustrum.
I can develop a template that you can use to make the cone.
Regards Whitworthsocket

Edster,
The Bottle may be more portable? Are we talking about an E size bottle or a G size Bottle.
A G size bottle is a real pain to move It needs a dedicated trolley to move it and hold it...

Yoshi,
There are many things for you to learn.
1.If the machine is advertised as a Tig welder then you will only get a Tig handpiece.
If it is advertised as both Tig and Stick (MMA) then you...

Mat,
welding chain with electric arc is prone to major problems it need s to be heat treated to retain its integrity. While you are heating up one link the next one is being annealed. And so on...

Ray, Bentonite is used in the drilling industry to seal the hole and stop it collapsing onto the drill bit and the drill rods.
I would look in the yellow pages or do a web search for waterboring...

Yonnee.
I have to disagree. Thicker does not neccesarily mean stronger.
Micheal use 75x50x2 RHS over 65x35x2.5RHS The strength mainly comes from the size of the section. Using 2mm is plenty strong...