Search:

Hi all and yes my NT50 has a 10 kw motor...
thanks Tony

Hi all, its COLD this time of year in Ballarat ,,,,But its only down the road....
Tony

Hi there is no Bridge Rectifier, 240 ac in and out put 45 v to 50 v and 75 v to 80 v ac out,.. and a slide choke.
the last time I looked in a box welder.
Tony......

Hi looks like the armature is on the way out..ps lot of sparks at the brushes when running?
Tony...

Hi put the welder away and start sewing :roll: wood work Too .
yes I know we buy trailers and say why.
I picked up a 6x4 last week onedays work no way.
Tony

Hi 15 year old set up bolt in /out..
for trail bike set.. alum. ramp not in pic..
have put road bikes on it eg gpz 900s
Tony....

Hi all got one :no:
cig lot easier to use .
it ant no tig Torch .
$800. :o
Tony

Hi all
A small box 4lbs from the states 7 days and only $20. for post, he did want $29.
not bad for time.
Thanks Tony

Hj
looks like a china import...
the one big green shed sells...????
Tony

Hi I have one of these.
sits in front window. No cat..
Tony

Hi all
I use 4 x 200 lt drums fill them up, roll onto trailer .
only way to stop the floor out rusting leave empty and well painted..

I have seen floors rails and A frame rusted out been towed...

Hi all
some BF ford uites have 16mm vented dis 2mm they get away with it.
Tony

Hi all
This commie one is from a solid diff which moves wheels .
Tony

Hi pic of cv joint
Tony

Hi a pic of a comie shaft.
can get a close up of the cv.
Tony

Hi all
Yes very right.
But shops ,stores are trying to send you back to the importer.
Eg Aldi is one after 60 days. For warranty claims ring the importer.
I did lay the law down with them....

Hi all
could try a steel fly wheel off a jap car engine ,200B
have used a fly wheel as a fly cutter on a mill for heads ect.
tony

Hi yea I see .can not do it with the book .
you just go around and around.
Tony

Hi all did down it from left hand side, view the book pdf,

Thanks Tony

Hi all
Chev c20s have a C chassis , the 1" dia solid bar with 3/8 is for spacing the box
to the chassis . I do not think the ford car box is strong enough for a 3.250+ ton truck.
Ba is a...

Hi all
if looking for carbon rods try "carbon ark rods"
Eg Screen Plate Maker - AC DC Carbon Arc Rods - Etching
I have used them when screen printing years ago.
Try screen printing...

Hi
Grahame , Vernonv and all
1999 fe is old can mig, have repaired a zinc coat 88 chev very very hard to clean the zinc off for welding. zinc will not stop rusting as you can see with the...

Hi ,those mild steel which are zinc plate are brittle if not heat treated right.
M12 at 1.32 is a good price in my book.
39 mm kits at Marshall trailers are $23.00 + bushes.
they will post.
...

Hi you can not get all zinc off and no car panel is flat ,zinc sheet, paint will not stick to it .
Well its ok for a patch up.

I have done a lot paint and repairs.
be a car or trailer zinc...

Hi
LOT of distortion ? its how you weld .
Tig will not re work will crack sometimes.
mig ok but needs to be cleaned up with a grinder more heat.
zincanneal sheet . Do not like welding it and...

Hi
I found it best to use a roof or bonnet for repair panel.

just cut it cut with a 9" angle grinder or a demo saw .

a vn to vs roof. s/wagon is big .

I would use 4' angle grinder to run...

Hi the nut is welded to the hing inside the tail gate but it most likely to to be rusted.

ps i have seen some fords with checker plate aluminum a cross the back.
tony

Hi big repair there.
it will need to come off
replace that lower skin and inner panel part tooooo.
its needs to be cut out not just boged up.
its oxy mig or tig . not stick no way.
join under...

Hi all
I like to oxy weld a lot of car panel repairs as you can still work the panel.
With mig / tig it will crack sometimes when you work it into shape.
Be it with steel wire/rod, if a...

Hi all
And that one on Ebay has been droped,
And its up to $500 +…..???????
I have got 2 , one W/Brown 212 seies very good condition had it for 20 years.
No 2 is 242 series pick up for...

Hi all
Could make a Tool and Cutter Grinder out of a old car valve grinder.
got one in the work shop will look at it later this week.
Tony

Hi
would it be a ton in it.
a mates got one like it, may be 450kgs could be smaller.
Tony

Hi
it has a plate maker ???? green >???.
But it its bolted together.
It may take 500+ kg but for how long??????
Tony

Hi all
cnc billet engine blocks mainly for racing be wet or dry ,one offs.
Tony

Hi was in Bunnings having a looking for cutting dics.
So I see Bunnings are now selling trailers.
Had 2 , one may be a 6x4 with a low cage.
And a Tare of 165 Kgs ???
and a GVM of 750kgs.
all...

Hi

links in valid link.???
Tony

Hi all
Com vc were do live ,, I am in melton
got a roll of clip belt if you need a meter or so.
send a email .
its 4.00pm will be back 5.00pm
Tony

HI
Dust ect in eyes is on top of the list .
Tony

Hi all
Spot on Captain caveman good one.
Tony

Hi all
You can not use compressed air to clean in a work shop .
As it is dangerious blowing dust around the shop major health hazard to the workers..
Welders,milling machines etc (eg car brakes)...

Hi all
The kinchrome one I got did not last very long 200 or 300 hunderd and they would not
replace it , 3 or 4 months old.... alot of kinchrome tools are very good.not this one????
Tony

Hi all
NO blow outs with compressed air now,
MUST use a vac to remove dust and dirt NOW.
Vaccum out check all leads ect ect, test and tagg
Before put back into service.
No compressed air to be...

Hi all
Only been to the air show by DC3 out of Essendon.
No time this year
The DC3 with the blue band NO air con hot on a hot day.
The DC3 with the orange band I think has air was not as hot in...

Hi all
A 30 year old arc welder is all right just use good rods.......:2tsup:
and a short lead on a 15A power point......:)

Tony

Hi
Running a machine off an inverter vfds transformers
YOUR safety RCDS will mostly not trip..

tony

Hi if your tooling or parts comes in by post most likely no taxs.
if comes in by a freight company you will pay.

Also useing VFDS, Transformers to power 3 ph motors ect.
YOUR safety...

Hi
dc into induction motor would work as a brake,
( DC brake )

Hi when I got my mill it was in boxs in bits.
ok, you may to pull it all a part.
can not recall how armature shaft gos into the gearbox if it will slide out.

1
You can try by pulling motor...

Hi o rhs ? me thinks that was angle.

Hi the copper pulls some heat out of the job and will help stop blowing holes ...
Tony