Printable View
Hi to all i'm new to this forum, hope someone with experience on the Myford Super 7 lathe can help. I inherited this lathe in 1992 and used it occassionaly for turnin a bush etc. now that I have time I want to do some screw cutting but not sure how to setup the gear train for imperial threads. The lathe has a Norton (I think) gerabox but the gear train needs setting up. Anyway now I'm going to have some coffee.
Cheers Barry
Welcome aboard Barry.
I don’t have any Myford experience, but I’m sure there will be others here that can help.
Steve
Hi Barry,
Welcome to the MetalWork Forums.
We have some fine folks here who are supportive friendly and helpful.
There is a dedicated lathe Forums here so there is a good place to start or perhaps in Metalwork General.
Please take the time to navigate around the forums to view the varied and interesting subjects.
To do this, goto the the FORUM box in the top left hand corner of the screen and click . When the dropdown menu appears click Forum Home and a scroll down page will come up.
Scroll down the page and the various help pages and sub forums shall be shown.
Please read the Terms of Use on the very top of the scroll down page - they are our rules.
To save time here's the link
https://metalworkforums.com/f90/t197...terms-tou-read
Many pages also have a sticky at the top.If you post its always a good idea to check the sticky ,if there is one there.
Please post your questions in the appropriate MetalWork forum. If further info is needed you can always PM me.
Again, welcome to our forums.
Grahame
Welcome to the forum Barry.
Ross
Thanks to all for the welcome , will start research and experiment.Quote:
Originally Posted by old1955
Regards Barry