One of the most handy tools in my workshop
New to machining and have a mill or die grinder - you need to get one of these!!
https://uploads.tapatalk-cdn.com/202...3c795e23b1.jpg
Nope - not the Tyre inflator ;)
Here’s a semi naked photo…
https://uploads.tapatalk-cdn.com/202...3a414f48b3.jpg
And the tweezers that go with it for extracting the inevitable steel splinters that find their way into your hands
https://uploads.tapatalk-cdn.com/202...74277623d6.jpg
The cover is a bit of rag I tied around it about 5 years ago to keep the dust off, and it’s worked so well I just kept it there. Just pushes back when you need to use it.
The black button is the switch for the inbuilt light.
It sits in the corner out of the way, at a nice height for surgery, plugged into the power point ready to go.
Not a metalwork tool as such - but still a very valuable tool in the workshop.
Steve