Micro switch for inside DSG headstock
Slowly working through the electricals on my DSG lathe, and found the clutch microswitch is faulty. It’s got a nice clear actuation click but the switching is intermittent.
Looks like it’s possibly not the original and I’m guessing it’s full of oil.
https://uploads.tapatalk-cdn.com/202...647c538534.jpg
https://uploads.tapatalk-cdn.com/202...5428dda4f1.jpg
I checked the spec and it’s IP00 which is basically “not protected from anything”
Is there a particular rating or type of switch that will cope with splash oil inside a headstock?
Steve