A set of Drawers made from stainless sheet
Hi all,
I'm making a couple of storage drawers to fit in the front compartment of my camping trailer.
Usually I would just make them from 19mm pine or even ply but figured it was time to use my pan brake. I have some 1.2mm stainless sheet collecting dust so figured I'd finally put some of it to use.
This also made me get off my bum and finally do some study on the art of sheet metal folding.
It's more involved than I thought!!!
Anyway, after some fiddling around I finally got to something that resembled a drawer.
My only regret was not making the joining tabs wider, it meant I didn't have enough room to rivet the back plate on from inside, which would make for a flush internal finish.
The front will be 20mm marine ply.
It's great to be putting my folder to something worthwhile.https://uploads.tapatalk-cdn.com/202...4afbad0c6f.jpghttps://uploads.tapatalk-cdn.com/202...e3c93f2af5.jpg
Sent from my SM-G970F using Tapatalk