Hi Ozdog ,
Welcome to the MetalWork Forums,
Thank you for taking the time to introduce yourself. Many new posters don't bother. We have a very helpful group here.
First of all here is some information on how to make your way around the various areas of the forum.
To help you explore the other areas of our forum here's a guide on to to navigate our Forum and find all the interesting places.
Goto the
FORUM box in the top left hand cnr of the page and click the down arrow. This will bring up a pull down menu that has
Forum Home at the top
Then click
Forum Home which will present a scroll down page.
Our rules,the Terms of Service are right at the top ,please read them.
Below that are all the various areas and sub forums that make up our MetalWork forums.
Ok! Now the Housekeeping bit is over I can offer some info about the machine. It is basically intended for fabricating decorative ironwork like scrolls,lacework,arbor frames and kids jungle jim frames and security door infills.They were expensive unit 15 to 20 years back. If you look like getting interested in that sort of thing ,its a gem.
Here is one the yanks make go there for a better idea of what the equipment can do.
https://www.metalcraftusa.com/scrollbenders.html
There was an Aussie model but I can't remember its name for the life of me.They were made in Qld near the Gold Coast
If you intention is to sell it please check out via the directions above, a sub forum called Metalwork Equipment Machinery Market and be please be sure to read the sticky for the posting rules.
If you want to discuss it further please post in the General Metalwork.
Again a big Welcome
Thanks
Grahame