Results 16 to 30 of 134
Thread: Show me your Anvil thread...
-
21st Feb 2016, 07:03 PM #16
Golden Member
- Join Date
- Oct 2001
- Location
- ACT
- Posts
- 667
Hi Andrew,
Dont know much about the blower unfortunately. I got it at a swap meet a while ago now, its in quite good working order and blows well. Its made out of cast alloy material - standard hand cranked blower - the only marking on it is 60A on the other side. You can also run it off a V belt on the small pulley.
I like the hand blowers as they basically slow down and stop blowing when you let go, so it saves a bit of fuel as the fire is not burning away when you are at the anvil, then it starts the fire up quickly when you come back.
Cheers
blower.jpg
-
20th Sep 2016, 10:38 PM #17
Golden Member
- Join Date
- Oct 2001
- Location
- ACT
- Posts
- 667
time for another one. This is the forge set up at my local smithy. Thats a ~2cwt Peter Wright.
smithy 0415.jpg
-
28th Sep 2016, 10:01 AM #18
Most Valued Member
- Join Date
- Jul 2006
- Location
- Athelstone, SA 5076
- Posts
- 4,258
-
28th Sep 2016, 10:57 AM #19
He just made a monster 400kg one too. Unfortunately the horn looks really light, not nearly enough depth were it meets the body.10492270_982939018481829_5264482455516204079_n.jpg
1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
28th Sep 2016, 11:37 AM #20
Most Valued Member
- Join Date
- Jul 2006
- Location
- Athelstone, SA 5076
- Posts
- 4,258
-
28th Sep 2016, 01:55 PM #211915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
28th Sep 2016, 02:45 PM #22
Show me your Anvil thread...
Smallest to largest
Cast with top plate
Wrought stumpy nose
70kg
105kg solid
160kg wrought
Over 200kg Wrought
And the striking anvil.
Coke forge.
…..Live a Quiet Life & Work with your Hands
-
28th Sep 2016, 08:27 PM #23
Golden Member
- Join Date
- Oct 2001
- Location
- ACT
- Posts
- 667
and I thought I had a few.....
what's that 70 kg lump of steel from?
-
28th Sep 2016, 08:35 PM #24
Show me your Anvil thread...
It was a slug of something like 4140, from a water jet place. It was my first anvil as I couldn't afford a real one at the time. It still gets used as it is super flat and has sharp edges.
I also forgot one....…..Live a Quiet Life & Work with your Hands
-
28th Sep 2016, 08:37 PM #25
-
3rd Oct 2016, 11:15 AM #26
Golden Member
- Join Date
- Oct 2001
- Location
- ACT
- Posts
- 667
ok here's a few
another of the attwood
IMG_0446.jpg
224 BK
IMG_0439.jpg
112 BK
IMG_0444.jpg
and a small jewellers style that I made the pattern for and cast when I was an apprentice
IMG_0445.jpg
there's also another but its behind too much stuff to get a pic.
-
3rd Oct 2016, 11:18 AM #27
I guess your not using the one you can't get a pic of then lol.
…..Live a Quiet Life & Work with your Hands
-
4th Oct 2016, 08:41 PM #28
New Member
- Join Date
- Oct 2016
- Location
- Queensland Australia
- Age
- 57
- Posts
- 3
may appear bit light but the horn is actualy 140mm thick where it meets the body of the anvil. The foot of the anvil is 65mm thick not including the upset block. 1400mm tip to tip.
-
4th Oct 2016, 08:43 PM #29
New Member
- Join Date
- Oct 2016
- Location
- Queensland Australia
- Age
- 57
- Posts
- 3
None get made in a weekend but finished on a weekend.
This post refers to post 19
-
4th Oct 2016, 09:18 PM #30
New Member
- Join Date
- Oct 2016
- Location
- Queensland Australia
- Age
- 57
- Posts
- 3
PJH 400kg a.jpg Pictures not very good but hope it helps
Similar Threads
-
Anvil on e Bay
By auscab in forum THE SMITHYReplies: 6Last Post: 28th Jan 2013, 10:34 PM -
SOLD: Anvil
By ranga_rod in forum METALWORK - Machinery, Equipment, MARKETReplies: 2Last Post: 25th Nov 2012, 04:15 PM -
TASMANIA Anvil
By rwatson in forum METALWORK - Machinery, Equipment, MARKETReplies: 1Last Post: 17th Apr 2011, 07:40 PM