Results 1 to 7 of 7
Thread: A couple of little tinnies
-
10th Jul 2016, 12:25 AM #1
A couple of little tinnies
It's metalwork, but not as we generally know it. But great fun!
My grandchildren aged 6 and 8 often ask to make something in my workshop that is more complex than they imagine (jetskis, remote control cranes etc). I have them here only long enough each time for very simple things, unfortuately.
This week they wanted to build a little metal boat....
I gave it a fair bit of thought and came up with a design for making little 'tinnies' out of 2 and a half dogfood tins.
I got them to examine our (full-size) tinnie and think about what each piece would have looked like before it was bent into shape. We then sketched those shapes with my help and cut them out of paper and glued them together with tape. It looked indeed like a boat
I suggested that for a smaller version we could use less pieces of metal and combine some of the shapes, showing them on paper how we could make 'tucks' by cutting out wedges and fold ome piece out of one. The result was still boat shaped but with less joints.
We then used the paper patterns to transfer the shapes to cut-apart dogfood cans with tops and bottoms cut off and walls rolled flat. They then cut the shapes out with lot of warnings from me that the edges and any jagged bits would be extremely sharp. I showed them how to fold and roll edges (roughly) to reduce the exposed sharp bits. We then folded and hand-shaped the two sides and trimmed them so they would line up with a little outward flange at the keel and gave a reasonably straight rolled over top edge.
Applied a few clamps to hold it all in shape. They were quite impressed.
Then I repeated a lesson I had from my grandfather when I was 8 and still remember well!
I got out an old copper soldering iron which we heated on the kitchen gas stove until the flame went green (much to Pam's delight - not).
A little Bakers flux along the joints and first showed them, then let them solder the joint themselves.
The result were a very sturdy tin toy boat. I told them and showed them on our tinnie that metal boats should have flotation built in. So we folded two seats and put blocks of styrofoam under them and then soldered them in too. Last was a bit of tinned wire soldered on for an anchor 'rope' at the front. A good scrub removed the flux.
Leak test, flotation test and flotation after submersion tests all worked out first shot.
They loved it!
So yesterday they aked if we could make another one so they had one each. Three more dogfood cans were washed out and in about 2 hrs we had another one - almost entirely done by the kids.
Sorry I didn't take photos of the construction, but here is a shot of the second happy home-made 'tinnie' owner.
Nobody suffered any cuts or burns - not even me....
2016 July 9.jpgCheers, Joe
retired - less energy, more time to contemplate projects and more shed time....
-
10th Jul 2016, 12:44 AM #2Most Valued Member
- Join Date
- May 2011
- Location
- Murray Bridge S Aust.
- Age
- 71
- Posts
- 5,959
Nice work Joe, looks like a happy young man you have there. Nice to be able to spend time with the grandies.
Next thing is to work out how to make it work with a rubberband and propellor.
KrynTo grow old is mandatory, growing up is optional.
-
10th Jul 2016, 02:04 AM #3
I was thinking about something more along these lines...
https://www.youtube.com/watch?v=p-M9KUbxxfk
Will have to do that at Christmas time. They leave on their adventure of a lifetime in the morning: 5 to 6 months around the West of the country....Cheers, Joe
retired - less energy, more time to contemplate projects and more shed time....
-
10th Jul 2016, 12:18 PM #4Member
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 97
Wow - what a fantastic project, and so simple!
-
10th Jul 2016, 12:40 PM #5Senior Member
- Join Date
- Jan 2011
- Location
- shep Victoria
- Age
- 97
- Posts
- 157
I think I need spec savers hit the wrong button again
-
10th Jul 2016, 02:05 PM #6
Great project Joe,
The kids will take those things that you are teaching them throughout their lives. I use to make those pop pop steam boats when I was a kid, and race them in the irrigation channel at the end of our street.
Ray
-
12th Jul 2016, 04:55 PM #7Senior Member
- Join Date
- Jun 2011
- Location
- gold coast
- Posts
- 303
You're the perfect Pop Pop for such delightful and enterprising young inventors, Joe. Their lives will be enhansed by your contributions.
Similar Threads
-
Couple of Odd Jobs
By wheelinround in forum METALWORK GENERALReplies: 3Last Post: 5th Apr 2015, 07:44 AM -
Couple of Lathes
By electrosteam in forum EBAY, GUMTREE, and other off forum sales sitesReplies: 1Last Post: 5th Dec 2014, 10:18 AM -
A couple more 9As...
By festy_ in forum THE HERCUS AREAReplies: 1Last Post: 1st Jan 2011, 05:22 PM -
Couple Q's
By Unit_01 in forum METALWORK GENERALReplies: 12Last Post: 4th Apr 2007, 09:41 AM