Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: New Workshop
-
21st Feb 2008, 10:35 AM #1New Member
- Join Date
- Feb 2008
- Location
- Sydney
- Posts
- 4
New Workshop
Hi All
For my first Post
To move the makeshift workshop from the lounge into the garage
For the last 18 months renovations to the unit has made the lounge room a bit of a mess.So I decide to move everything out into the garage
One little problom garage is full . Need incentive to throw away,Hmmmm new toys from hare & forbs. ie Lathe ,mill, bandsaw
Plans are set
2 weeks ago I started removing junk (mainly building material)or to put in a better word recycled into my new benches down one side and cupboard on the other side with storage overhead
All the tools and anything else that i can find is hanging on ply above the benchs
New Power Board, lights and power running the full length of the bench
Ready for the new equipment.
Hopefully this weekend i will have acheived my goal and all will be ready
Photos to come
First Project to breakin the workshop will be a Model 1/6 scale tank
My first post hope it was not to long thanks for reading
Regards
Paulxsteel
Electrican/Estimator/Electrical fitter
Interests,custom PC,Building RC ie cars,tanks,anything that moves
-
21st Feb 2008, 10:52 AM #2
Welcome to the mad-house Paul.
Sounds like you have your workshop well and truly sorted. There's nothing like filling it with new toys.Cheers.
Vernon.
__________________________________________________
Bite off more than you can chew and then chew like crazy.
-
21st Feb 2008, 11:01 AM #3
Welcome Paul all sounds very exciting. How about some pictures?
How secure is your garage?
HH.Always look on the bright side...
-
21st Feb 2008, 11:41 AM #4
Paul
As a fellow electrician in a former life and enthusiast on this site welcome indeed to the forum,good luck with the workshop.
Peter
-
21st Feb 2008, 01:27 PM #5New Member
- Join Date
- Feb 2008
- Location
- Sydney
- Posts
- 4
The garage door has couple grade 5 padlocks on it .This will improve with a new steel frame fitted to the rear of the tilt a door.
-
21st Feb 2008, 01:31 PM #6New Member
- Join Date
- Feb 2008
- Location
- Sydney
- Posts
- 4
Thank you all for the welcome
Will take some pictures on the week
-
21st Feb 2008, 03:45 PM #7Diamond Member
- Join Date
- Sep 2006
- Location
- Australind , WA
- Age
- 58
- Posts
- 1,277
We wanna see the tank too!!!
-
25th Feb 2008, 11:09 AM #8New Member
- Join Date
- Feb 2008
- Location
- Sydney
- Posts
- 4
http://us.share.geocities.com/paulxsteel/IMG_8187.JPG
Workshop picture