Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: .5 mm Slot need help
-
25th Sep 2021, 05:01 PM #1
.5 mm Slot need help
.5 mm slot needing done in some )01 Tool steel(supplied).Have a small request, commission preferably in the Easter Suburbs of Melbourne,I’m based in Glen Waverley tho i could post out as well.(due to lockdowns)
I’m wanting a slot milled trough a piece of 01 tool steel to make a wood working saw back,a Back saw.
The saw plate is .5 mm thick.
The slot needs to be 0.5mm wide 11/12 mm deep by about 300 mm long,the supplied 01 is 6mm thick 38 mm tall by about 400 mm long precision ground stock.
Happy obviously to pay for this, not looking for a freebie.
Cheers Matt.
-
25th Sep 2021, 08:25 PM #2Golden Member
- Join Date
- Oct 2001
- Location
- ACT
- Posts
- 667
curious as to why you are using tool steel for the back? had some on hand?
-
25th Sep 2021, 08:35 PM #3
-
25th Sep 2021, 11:22 PM #4Golden Member
- Join Date
- Mar 2009
- Location
- Melbourne
- Age
- 54
- Posts
- 825
G’day Matt,
I’d be happy to do it for you, I’d just have to get a 0.5mm slitting saw which might take a week or two.
Cheers,
Greg.
-
26th Sep 2021, 12:03 AM #5
Similar Threads
-
45 degree slot through aluminum rod
By coppertop in forum METALWORK GENERALReplies: 19Last Post: 7th Jan 2021, 06:56 PM -
T-slot Clamps
By electrosteam in forum METALWORK - Machinery, Equipment, MARKETReplies: 1Last Post: 20th Jun 2020, 11:08 AM -
Tee Slot Bust Out
By DSEL74 in forum METALWORK GENERALReplies: 13Last Post: 12th Sep 2015, 08:57 PM -
HM 52 quill slot
By Dave J in forum METALWORK GENERALReplies: 15Last Post: 6th Jan 2013, 04:28 PM -
tee slot size
By welder in forum METALWORK GENERALReplies: 3Last Post: 25th May 2010, 05:38 PM