Needs Pictures: 0
Results 1 to 2 of 2
Thread: Home built tap grinder
-
28th Jul 2021, 12:36 PM #1Senior Member
- Join Date
- Nov 2019
- Location
- Brisbane
- Age
- 69
- Posts
- 452
Home built tap grinder
https://www.youtube.com/watch?v=5YUzoChUbvY
Hello again.
It's not my work but this site has a lot of build info for home made attachments.
We do need a tool grinding forum.
Regards
BC
-
28th Jul 2021, 06:13 PM #2
Hi Guys,
The same principle can be used for grinding/sharpening Weldon single hole countersinks. The requirement is for the taper to be ground the full 360 degrees of the cone.
I made and published details on the forum of the jig I made to do them on a DE grinder.
03-08-2020-01.JPGBest Regards:
Baron J.
Similar Threads
-
Home built toolpost grinders
By Karl Robbers in forum METALWORK GENERALReplies: 50Last Post: 31st Aug 2020, 10:23 PM -
Home built fly cutter
By steamloco1954 in forum METALWORK GENERALReplies: 2Last Post: 2nd Mar 2020, 11:06 PM -
Churchill Cylindrical Grinder. Free to good home.
By Machtool in forum METALWORK - Machinery, Equipment, MARKETReplies: 15Last Post: 8th Sep 2016, 12:21 AM -
Good home looking for old surface grinder
By StrayAlien in forum WANTED TO BUYReplies: 0Last Post: 1st Sep 2016, 08:57 PM -
Home Made Surface grinder Auto Feed
By steran50 in forum METALWORK GENERALReplies: 0Last Post: 17th Aug 2012, 08:04 PM