Likes: 0
Needs Pictures: 0
Results 1 to 1 of 1
Thread: Back in the belly of the borer
-
31st Oct 2020, 01:43 PM #1Senior Member
- Join Date
- Nov 2019
- Location
- Brisbane
- Age
- 69
- Posts
- 452
Back in the belly of the borer
SAM_0718.jpgSAM_0718.jpgSAM_0719.jpgHi to all.
Finally back on the borer repair.
I can see why assembly with out the factory tools is so hard. The first 2 pics are of the thrust bearing seat on the shaft. The fit is so tight the inner race left juddering marks as it was pulled off. No edges broken or lead in used. A few chamfers applied and a good polish of the journals before we try again. The outer races are also a super tight fit in the gearbox. Did get one with the tollerances all one way?
Next week we try a refit
BC
Similar Threads
-
pot belly wood heater design
By gallegos in forum METALWORK GENERALReplies: 37Last Post: 8th Nov 2020, 10:57 AM -
Jig Borer Restoration
By wheelinround in forum ANTIQUE AND VINTAGE MACHINERYReplies: 7Last Post: 11th Aug 2020, 09:23 PM -
SIP 8P jig borer
By markgray in forum METALWORK GENERALReplies: 10Last Post: 19th Feb 2018, 08:56 PM -
Replacing Worn Out Belly Pan in 18" Wood Chipper
By Acco in forum TRAILERS & OTHER FABRICATED STUFFReplies: 3Last Post: 5th Jan 2012, 11:46 PM -
pot belly butterfly valve
By kraits in forum METALWORK GENERALReplies: 26Last Post: 3rd Jul 2011, 04:28 PM