Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  1
Results 1 to 10 of 10
  1. 8th May 2020, 08:44 PM #1
    SurfinNev
    SurfinNev is offline Most Valued Member
    Join Date
    Nov 2008
    Location
    North Brisbane. Qld. Australia
    Age
    70
    Posts
    1,513

    Default Low Profile Chuck

    Been searching for a low profile three jaw chuck around 100mm, with a largish through hole for my bench drill. Not having much luck yet. Any tips on where to look for these?
    Nev.
    Reply With Quote Reply With Quote
  2. 9th May 2020, 09:48 AM #2
    Grahame Collins's Avatar
    Grahame Collins
    Grahame Collins is offline Super Moderator
    Join Date
    Jan 2004
    Location
    Mackay North Qld
    Posts
    6,446

    Default

    Hi Nev,

    I think many of us are having a problem with what you mean by a low profile chuck.

    I know I am.

    Is it 100mm long or 100mm in diameter? What drill diameter capacity do you want it to have?

    Grahame
    Reply With Quote Reply With Quote
  3. 9th May 2020, 10:04 AM #3
    SurfinNev
    SurfinNev is offline Most Valued Member
    Join Date
    Nov 2008
    Location
    North Brisbane. Qld. Australia
    Age
    70
    Posts
    1,513

    Default

    80 or 100mm diameter lathe Chuck. By low profile I mean no more than 50mm height. Want to mount to drill table to centre round bar for drilling and tapping.
    Nev.
    Reply With Quote Reply With Quote
  4. 9th May 2020, 11:23 AM #4
    cfranks
    cfranks is offline Member
    Join Date
    Apr 2015
    Location
    Tungkillo, South Australia
    Age
    87
    Posts
    74

    Default

    I bought this 30 years ago and never used it. Slightly larger than you mentioned: 50 mm high x 150 mm dia. Jaws are reversible and individually adjustable.

    Low Profile Chuck.jpg
    Reply With Quote Reply With Quote
  5. 9th May 2020, 11:46 AM #5
    SurfinNev
    SurfinNev is offline Most Valued Member
    Join Date
    Nov 2008
    Location
    North Brisbane. Qld. Australia
    Age
    70
    Posts
    1,513

    Default

    Need three jaw now. May get a four jaw as well later.
    Nev.
    Reply With Quote Reply With Quote
  6. 9th May 2020, 12:45 PM #6
    KBs PensNmore
    KBs PensNmore is offline Most Valued Member
    Join Date
    May 2011
    Location
    Murray Bridge S Aust.
    Age
    71
    Posts
    5,959

    Default

    Nev, what diameter bar are you wanting to put in the chuck?? Asking as this will determine the diameter of the chuck.
    https://www.ebay.com.au/itm/8-200mm-...29?epid=250274
    Found this in evilpay, is this the sort of thing you're after???
    Kryn
    To grow old is mandatory, growing up is optional.
    Reply With Quote Reply With Quote
  7. 9th May 2020, 01:45 PM #7
    stix012
    stix012 is offline Senior Member
    Join Date
    Nov 2008
    Location
    Brisbane Australia
    Posts
    122

    Default Low profile chuck.

    Nev. I have a four jaw independent only one and an eight inch high at the face , English made Burnerd in excellent condition if that suits you.
    Jim.
    Reply With Quote Reply With Quote
  8. 9th May 2020, 06:59 PM #8
    SurfinNev
    SurfinNev is offline Most Valued Member
    Join Date
    Nov 2008
    Location
    North Brisbane. Qld. Australia
    Age
    70
    Posts
    1,513

    Default

    Jim

    Is this the type with the pinions on an angle? What diameter is it and what is the through hole size?
    Nev.
    Reply With Quote Reply With Quote
  9. 9th May 2020, 08:39 PM #9
    stix012
    stix012 is offline Senior Member
    Join Date
    Nov 2008
    Location
    Brisbane Australia
    Posts
    122

    Default

    Quote Originally Posted by SurfinNev View Post
    Jim

    Is this the type with the pinions on an angle? What diameter is it and what is the through hole size?

    It is just a standard chuck , no angled pinions , one inch through hole.
    Reply With Quote Reply With Quote
  10. 11th May 2020, 07:47 PM #10
    SurfinNev
    SurfinNev is offline Most Valued Member
    Join Date
    Nov 2008
    Location
    North Brisbane. Qld. Australia
    Age
    70
    Posts
    1,513

    Default

    Got myself a good used four jaw with a height of 45mm and a 25mm bore. Still looking for a three jaw.
    Nev.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Profile cutting tip
    By Michael G in forum METALWORK GENERAL
    Replies: 3
    Last Post: 23rd Apr 2019, 10:14 PM
  2. adding age to profile
    By steamingbill in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACK
    Replies: 1
    Last Post: 22nd Feb 2014, 01:25 PM
  3. Issue with my profile
    By Arry in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACK
    Replies: 4
    Last Post: 9th May 2013, 03:48 PM
  4. Low Profile Clamps
    By John H in forum METALWORK GENERAL
    Replies: 9
    Last Post: 7th Jan 2010, 11:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules