Needs Pictures: 0
Results 196 to 199 of 199
Thread: Punch 12mm hole in 8-10mm steel
-
13th Jan 2020, 12:18 PM #196WARNING
The owner, Administrators and Moderators of Metalwork Forums accept no responsibility or liability for
the misapplication or misuse of engineering principals mentioned or shown on these forums.
Members are advised to seek advice from a qualified engineering specialist
if they have any doubt the soundness of their design.
Neil Ellis
ADMINISTRATOR
-
7th Feb 2020, 08:33 AM #197Most Valued Member
- Join Date
- Mar 2011
- Location
- Southern Flinders Ranges
- Posts
- 1,555
https://generaltools.com.au/product/...ric-drill-set/
Might be of interest to you Gazza, German made metric drills in 0.5 increments, change out of $100
Never tried them, can’t vouch for them, just happened to spot them looking for something else.
-
7th Feb 2020, 07:42 PM #198
Hi Guys,
German made Guhring are very good quality tools !
But that is one hell of a discount.Best Regards:
Baron J.
-
8th Feb 2020, 04:45 PM #199
Gazz hasn't been on here in nearly a month.
Right-o... would the bloke who hurt his feelings please own up.
Similar Threads
-
Lever action hole punch information
By KBs PensNmore in forum METALWORK GENERALReplies: 14Last Post: 28th Sep 2018, 09:21 PM -
Resharpening rotary hole punch
By neksmerj in forum METALWORK GENERALReplies: 0Last Post: 9th Jun 2015, 07:01 PM -
Drilling 30mm hole through 10mm plate
By Stephen H in forum METALWORK GENERALReplies: 57Last Post: 29th Mar 2014, 12:39 PM -
whats a good welder? welding 10mm / 12mm steel mig gas or gasless wood fire heater
By makitaLXT in forum WELDINGReplies: 3Last Post: 30th Jun 2013, 10:58 AM -
How to bend 10mm or 12mm steel tube
By jabell in forum TRAILERS & OTHER FABRICATED STUFFReplies: 8Last Post: 2nd Nov 2012, 04:35 PM