Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: Milling machine diamensions
-
25th Nov 2019, 02:10 PM #1Senior Member
- Join Date
- Nov 2012
- Location
- Mid North Coast NSW
- Posts
- 423
Milling machine diamensions
Does anyone have access to a Hafco metalmaster HM51 ?
Please, I just want to know its total height when the head is vertical and tilted ?
I'm worried about ceiling height and roller door height to get it in.
Just not sure if it will fit in my shed.
-
25th Nov 2019, 03:50 PM #2Most Valued Member
- Join Date
- Jun 2007
- Location
- sydney ( st marys )
- Age
- 64
- Posts
- 4,890
Vert 2070
Hor 1620
-
25th Nov 2019, 07:34 PM #3Senior Member
- Join Date
- Nov 2012
- Location
- Mid North Coast NSW
- Posts
- 423
-
25th Nov 2019, 07:38 PM #4Most Valued Member
- Join Date
- Jun 2007
- Location
- sydney ( st marys )
- Age
- 64
- Posts
- 4,890
No , when the head is turned the quill feed sits about 70mm above the ram, this is with the quill feed handles removed.
-
25th Nov 2019, 09:40 PM #5Senior Member
- Join Date
- Nov 2012
- Location
- Mid North Coast NSW
- Posts
- 423
-
26th Nov 2019, 05:50 PM #6
If you are y'all you will need to raise it up. I raised mine 150mm, 100mm would do though as I allowed for my 50mm high dangerous goods platforms I stand on to let the chips go through instead of walking on them.
Using Tapatalk
-
26th Nov 2019, 10:47 PM #7Senior Member
- Join Date
- Jun 2005
- Location
- Townsville, Tropical Nth Qld.
- Posts
- 226
-
27th Nov 2019, 10:47 PM #8Senior Member
- Join Date
- Nov 2012
- Location
- Mid North Coast NSW
- Posts
- 423
-
28th Nov 2019, 08:29 AM #9
I've gote a 2.5 ceiling and the 150mm risers, so you definitely won't have a problem.
Using Tapatalk
Similar Threads
-
CVA milling machine
By welder in forum EBAY, GUMTREE, and other off forum sales sitesReplies: 0Last Post: 20th May 2019, 09:25 PM -
VICTORIA Milling Machine
By ersbruce in forum METALWORK - Machinery, Equipment, MARKETReplies: 0Last Post: 5th Jun 2012, 02:14 PM -
HM- 50 Milling Machine
By woodfast in forum METALWORK GENERALReplies: 6Last Post: 7th May 2012, 01:05 AM -
Milling machine set ups.
By 4-6-4 in forum METALWORK GENERALReplies: 3Last Post: 1st May 2012, 03:04 PM -
A little help with my first milling machine
By festy_ in forum METALWORK GENERALReplies: 36Last Post: 13th Apr 2011, 11:34 PM