Page 1 of 3 123 LastLast
Results 1 to 15 of 36
  1. #1
    Join Date
    Aug 2019
    Location
    Nambour Queensland
    Age
    63
    Posts
    86

    Default power hacksaw plans and designs

    hi, i have been wanting to build a power hacksaw for many years and of course been down the google path over and over. most of what is available is small and cheap type designs but i would like something of good quality and still compact enough to be practical in a hobby workshop. i know the imported saws are cost effective and its just plug in and go but i want a project and something completed thats going to be around for my grand kids to admire. it must be from bar stock totally and us a damping thats adjustable, vfd controlled or gearbox no sure yet. smooth acting movement, quiet and compact in design. accurate and adjustable to be kept correct. does anyone know of plans , photos or a past project i could copy. thanks brett.

  2. #2
    Join Date
    Feb 2013
    Location
    Laidley, SE Qld
    Posts
    1,038

    Default

    This may provide some ideas, its home made (not by me) I think it was once part of a miniature line shaft belt drive workshop. To give an idea of size the base is a 600 long piece of 5" x 2.5" hot rolled channel.

    A possible source of proper plans for a full DIY build would be the US or UK model engineer magazines from the first 60 or 70 years of last century.
    I'll never use the saw PM me if its of interest.

    IMG_3053.jpg

    IMG_3055.jpg

  3. #3
    Join Date
    Aug 2019
    Location
    Nambour Queensland
    Age
    63
    Posts
    86

    Default

    Looks interesting and a size I would prefer for the small materials I mainly use.

  4. #4
    Join Date
    Oct 2011
    Location
    Norwood-ish, Adelaide
    Age
    59
    Posts
    6,540

    Default

    I bought the Gingery book on making a power hacksaw many years ago. I started making it but it was not very rigid and there were some pieces that would not bolt together and work. I think it was one of those 'designed on paper' machines.

    Michael

  5. #5
    Join Date
    Aug 2019
    Location
    Nambour Queensland
    Age
    63
    Posts
    86

    Default

    Quote Originally Posted by Michael G View Post
    I bought the Gingery book on making a power hacksaw many years ago. I started making it but it was not very rigid and there were some pieces that would not bolt together and work. I think it was one of those 'designed on paper' machines.

    Michael
    yes i have looked at a lot of internet sites and most are a bit ordinary in there design, they will all work of course but not like a good quality made type, one thing i have not seen is the reverse stroke lifting which would save the blades im sure. i am not keen on buying plans that are like you stated. i can design and build my own but there is always some that will have done it better and you wish you had waited

  6. #6
    Join Date
    Nov 2017
    Location
    Geelong, Australia
    Age
    57
    Posts
    2,651

    Default

    When you say "made entirely from bar stock" do you mean no machining involved (just drilling and tapping holes to join the pieces) or do you mean e.g. no castings?

    Probably a better question would be what tools do you have access to to make one?

    Steve

  7. #7
    Join Date
    Aug 2019
    Location
    Nambour Queensland
    Age
    63
    Posts
    86

    Default

    Quote Originally Posted by OxxAndBert View Post
    When you say "made entirely from bar stock" do you mean no machining involved (just drilling and tapping holes to join the pieces) or do you mean e.g. no castings?

    Probably a better question would be what tools do you have access to to make one?

    Steve
    I have a lathe and a small mill , yes I ment no casting to make it a bit easier as my mill is horizontal and old and it needs a motor, so not great . But when I have the cash I'll get it running so anything is possible. I can weld etc, I have just about everything at hand.

  8. #8
    Join Date
    Nov 2017
    Location
    Geelong, Australia
    Age
    57
    Posts
    2,651

    Default

    I've got a Parkanson power hacksaw that is mostly fabricated from plate. The drive mechanism is just a 2 stage belt/pulley arrangement to gear it down. Bearing blocks are standard industrial pillow blocks. The saw frame and the arm it runs in are cast, but could be fabricated and machined, but they are a dovetail arrangement so particularly easy.
    Mine takes a 14" blade

    Have you seen the Hercus saw that's currently for sale in the markets section? I think that style of arm and saw frame arrangement would be reasonably easy to fabricate. Making the bars from chrome bar or linear shaft would be really nice, but you could make them out of whatever you wanted. Mount them by making up a stack of (say 4) support plates and boring the holes for the shafts in one operation. One plate at the open end of the bars, 3 plates to support the bars in the pivot arm. Maybe a bit of heavy channel for the pivot end of the arm - the support plates would and pivot tube could be easily welded into that). Hopefully that makes sense.

    I think a couple of fundamental decisions you need to make for a start if you are going to build one are:
    - what size blade are you going to use
    - are you going to run coolant

    That gives you rough size and whether you need to contain coolant in the base of the saw. With that sorted you can make decisions on the base construction and choose how you construct the arm etc.

    There's a reasonable amount of material in them, and if you're having to buy it all the cost will add up. I wouldn't be surprised if it was over $300 total for materials including bearings and pulleys etc - but I could be way off.
    Not a drama if you are creating an heirloom, but just saying...

    Maybe it doesn't hold the same attraction for you, but have you considered making a horizontal bandsaw instead?
    The standard design is tried and proven, but you could improve on it slightly and implement the tweaks that many have done on their import saws to make them a nicer tool to use. IMO it would be a much more useful tool in the workshop, and if any of the grandkids get into metalworking they could inherit it and continue to get good use out of it knowing that you built it.
    Similar could be said for a power hacksaw, but they are a tool that is approaching extinction, and I think if one of the grandkids with limited space was given the choice of the PH that grandad built or a bandsaw of unknown origin they would likely choose the bandsaw.

    If you want any photos of how my Parkanson is constructed just sing out and I'll grab some for you.

    Steve

  9. #9
    Join Date
    May 2018
    Location
    Brisbane
    Posts
    12

    Default Popular Mecs hachsaw

    Built one some time ago along the lines of this Popular Mechanics power hacksaw.
    Didn't use car parts but fabricated it along the lines of their design.
    Use it a lot. Works well. Works with either power hacksaw blades or hand hacksaw blades.
    Power blades are probably better but hand saw blades get good mileage especially when cutting thin material like angle iron and unistrut.
    Attached Files Attached Files

  10. #10
    Join Date
    Nov 2010
    Location
    Gippsland Victoria
    Posts
    733

    Default Hacksaw Plans

    I've accumulated a few plans from trawling around with google.

    You have probably already found these but just in case .....

    Myfordboy has plans, cannot remember if free or small price to pay, he has a youtube channel worth a look
    Popular Science has Plans on the google magazines site
    Edgar Westbury had plans published long ago in Model ENgineer, (PM me if you cannot find them)
    Popular Mechanics has plans on the google magazines site
    Duplex had plans published - not sure if I have those

    Do a search on the UK forum and you will probably find people who have built the Westbury and Duplex ones

    A few variations on the lathe mounted hacksaws exist, intuitively seems like it might somehow hurt the lathe, can anyone comment further ? There is a youtube video somewhere of somebody running one on a Hercus 9" lathe.

    Bill

  11. #11
    Join Date
    Aug 2019
    Location
    Nambour Queensland
    Age
    63
    Posts
    86

    Default

    Thanks for the info, all good suggestions and a bandsaw idea is not a bad one. I guess it must also end up being cost effective as well or it will be worth more than my qualos. The lathe driven idea was my first ,but space will be an issue around my lathe and generally in my shed full stop. I am over the abrasive cutters and dont want to see another 14 inch blade explode beside me again. I haven't been seriously looking at bandsaw plans but I'm thinking I should consider them. I have read the posts relating to one or the other and having a vertical position could be usefully on a bandsaw. Coolant may be an option but I won't use it a lot so cutting fluid would cover my needs I think. Thanks for the links I will have a look and see what I could use to suit my needs.

  12. #12
    Join Date
    Nov 2010
    Location
    Gippsland Victoria
    Posts
    733

    Default Speed Reduction Workaround

    Whether you go for bandsaw or hacksaw at some point speed reduction will raise its head.

    See attached photo for what I thought was a clever workaround using your existing lathe speeds, I pinched that idea from an American forum. Have been surprised that I don't see people using it more often. Is there something inherently bad about this idea that I'm not yet aware of ?

    I stopped using this after I bought a second hand power hacksaw.

    Bill
    Attached Images Attached Images

  13. #13
    Join Date
    May 2018
    Location
    Brisbane
    Posts
    12

    Default PM Hacksaw My build

    Attached are a few shots of my take on the Popular Mechanics hacksaw

    There is a mention of lifting the blade on the return stroke This design can do that. I set it up it to cut on the back stroke and the action pulls the blade down on the back stroke and tends to lift it on the return stroke. Not enough to lift it out of the cut.

    Can slice of 10 thou from the end of a shaft with a bit of careful tuning.

    Hope the pics are of some use.
    Attached Images Attached Images

  14. #14
    Join Date
    Aug 2019
    Location
    Nambour Queensland
    Age
    63
    Posts
    86

    Default

    some good pics to get ideas from i must say, i like the lifting on return stroke idea.i will have to think about the type of project i really want before i start.

  15. #15
    Join Date
    Jan 2004
    Location
    Mackay North Qld
    Posts
    6,446

    Default

    Here are some design elements from a U Tube on a light hacksaw.
    Some wood elements can be obviously substituted with steel.

    https://www.youtube.com/watch?v=mrk6pN53kxk

    Grahame

Page 1 of 3 123 LastLast

Similar Threads

  1. Help With Power Hacksaw
    By stevo81 in forum METALWORK GENERAL
    Replies: 14
    Last Post: 21st Mar 2017, 11:55 AM
  2. Power Hacksaw
    By Auskart in forum METALWORK GENERAL
    Replies: 4
    Last Post: 4th Sep 2011, 09:37 PM
  3. SOLD: power hacksaw
    By mistercartoon in forum METALWORK - Machinery, Equipment, MARKET
    Replies: 2
    Last Post: 19th Mar 2011, 05:51 PM
  4. Designs/Plans Forum.
    By Sturdee in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACK
    Replies: 4
    Last Post: 8th Jul 2004, 02:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •