Page 1 of 2 12 LastLast
Results 1 to 15 of 26
  1. #1
    Join Date
    Aug 2015
    Location
    Melbourne, Australia
    Posts
    843

    Default Clarkson autolock - I like it

    Recently I picked up a clarkson autolock chuck for the mill. I'm a bit of a newb so didn't really know too much about them.

    I got it for a song because it came for free with another item.

    Over time I had collected some cutters suitable for it but of course, they remained unused.

    I gave it a go last weekend and I have to say I really like it. Everything felt, well, great.

    I know they're old school now and everything is ER or the like, but I have to say, it just felt solid and worked well.

    I understand the CNC unfriendlyness, but anybody else still using them and like them?

    Greg.

  2. #2
    Join Date
    Aug 2015
    Location
    Melbourne, Australia
    Posts
    843

    Default

    Hey Pumpkinate, re pics just Google "clarkson autolock r8" and choose images and you'll see it. A commodity item.

  3. #3
    Join Date
    Feb 2013
    Location
    Laidley, SE Qld
    Posts
    1,038

    Default

    I bought an NT30 autolok 10 years ago, it seemed like a cool idea. I used it for a month or two, put it back in the box, kept using ER collets.
    Yours - anybodies - for the price of the postage.

  4. #4
    Join Date
    Apr 2018
    Location
    Drouin Vic
    Posts
    633

    Default

    I also picked one up (or a quality copy) fairly recently as I have a pile of threaded endmills / slot drills from various clearing sales. I also like it. None of the endmill creeping out of the collet as I have experienced with ER type.

  5. #5
    Join Date
    Oct 2004
    Location
    Southern Highlands NSW
    Posts
    1,894

    Default

    I use mine as I still have an assortment of threaded end mills to suit.
    They are more positively held compared to ER type, but I've not had problems anyway and concede ER system is more versatile.
    I also have a set of what I think of as American type holders in all imperial sizes.
    I like these too - very quick to set up and use with their simple side grubscrew holding method for the bits.

  6. #6
    Join Date
    Sep 2012
    Location
    York, North Yorkshire UK
    Posts
    6,436

    Default

    Hi Jordan,

    I think what you refer to as "American" type holders, may be in fact "Weldon" cutter holders, they have a grub screw that locks on to a flat on the cutter body.
    Best Regards:
    Baron J.

  7. #7
    Join Date
    May 2019
    Location
    Picnic Point, Sydney
    Age
    77
    Posts
    312

    Default

    Maybe I'm too old to change but using ER collets is a last resort. I like to take heavy cuts with the knowledge that the cutter will finish the cut in the same place in the collet that it started. Besides, I have hundreds of new & new reground cutters to suit the Clarkson chucks.

  8. #8
    Join Date
    Jun 2004
    Location
    Kyabram. Vic
    Posts
    632

    Default

    I have 2 of them. One is nt30 Clarkson copy with imperial collets and stopped the cutter creepage with the chinese hm50 mill. The other is a Clarkson nt40 with imperial and metric collets. Love them. Sadly I don't have enough threaded cutters; but for any HSS cutters I try to get the threaded variety.

    Ken

  9. #9
    Join Date
    Jun 2011
    Location
    Australia east coast
    Age
    71
    Posts
    2,713

    Default

    I have a 40 taper one, might have 2. Never use them. Not that I think they're bad, IMO they're a lot superior to the ER system for positive cutter holding. Just they're more bulky and I use ER collets for a lot of stuff anyway.

    You can't put a drill bit in an autolock chuck, nor a plain shank solid carbide cutter.

    As usual, horses for courses.

    PDW

  10. #10
    Join Date
    Sep 2010
    Location
    Lebrina
    Posts
    1,910

    Default

    Just looking at the pricing of threaded HSS end mills and slot drills and I think I may need to sit down! $153 for a 20mm end mill versus $34 for a plain shank (admittedly P&N as opposed to Alcock from Machinery House). They'd need to have some major advantages to justify the price differential.
    Are collets still available for the Clarkson Autolock?

  11. #11
    Join Date
    May 2019
    Location
    Picnic Point, Sydney
    Age
    77
    Posts
    312

    Default

    $153 for a 20mm end mill. There's a lot of money sitting in my cupboard then & that's not half of the collection.DSCN0530.jpg

  12. #12
    Join Date
    Oct 2008
    Location
    N.W.Tasmania
    Posts
    1,407

    Default

    Quote Originally Posted by Karl Robbers View Post
    Just looking at the pricing of threaded HSS end mills and slot drills and I think I may need to sit down! $153 for a 20mm end mill versus $34 for a plain shank (admittedly P&N as opposed to Alcock from Machinery House). They'd need to have some major advantages to justify the price differential.
    Are collets still available for the Clarkson Autolock?
    Try this bloke, I have had several very satisfactory dealings with him, and if you deal direct rather than going through his fleabay shop you may miss the GST component. You will find his contact details in the graphics on his Flea bay ads. A cheaper 20mm slot drill as an example.
    https://www.ebay.co.uk/itm/20mm-HSS-...IAAOSwfcVUCGkW
    Good luck

  13. #13
    Join Date
    Nov 2008
    Location
    Perth WA
    Age
    71
    Posts
    6,458

    Default

    Hi Greg,

    I have Autolocks in both small and intermediate sizes to fit my two mills. My chuck of choice when it comes to cutting tee slots where cutter slippage is preferably avoided.

    Hercus Slotting Head - Ram Dec 2009 022.jpg Hercus Slotting Head - Ram Guide Dec 2009 067.jpg

    And here is how you can enjoy the best of both worlds, Schaublin's EX collets.

    Schaublin EX Collets 001 (Large) (Large).jpg Schaublin EX Collets 008 (Large).jpg Schaublin EX Collets 018.jpg

    Bob.
    Last edited by Anorak Bob; 18th Jul 2019 at 11:24 AM. Reason: Remembered the EX

  14. #14
    Join Date
    Sep 2008
    Location
    Riddells Creek, Vic.
    Posts
    831

    Default

    Hi Bob, I zoomed in on your first picture to try and determine if there was a gap between the face of the collet nut and the body of the chuck, it looks like there is but i may be mistaken. The Clarkson instructions state that the faces must be in contact.

  15. #15
    Join Date
    Nov 2008
    Location
    Perth WA
    Age
    71
    Posts
    6,458

    Default

    Quote Originally Posted by Techo1 View Post
    Hi Bob, I zoomed in on your first picture to try and determine if there was a gap between the face of the collet nut and the body of the chuck, it looks like there is but i may be mistaken. The Clarkson instructions state that the faces must be in contact.
    You are not mistaken Lex. It's a wonder I've never snapped a centre point!!

    I just slipped up to the shed to have a look at the chuck mounted in the Hercus. With the cutter installed as per Clarkson's instructions it is possible to unscrew the cutter even after the final tightening of the nut. I don't know if this applies to the other Autolocks I have so I will have a fiddle tomorrow.

    8.JPG

Page 1 of 2 12 LastLast

Similar Threads

  1. For sale vic smaller Clarkson collets.
    By azzrock in forum METALWORK - Machinery, Equipment, MARKET
    Replies: 1
    Last Post: 18th Mar 2017, 02:07 AM
  2. Wanted Clarkson collets
    By azzrock in forum WANTED TO BUY
    Replies: 0
    Last Post: 11th Jul 2016, 02:53 AM
  3. Replies: 17
    Last Post: 9th Aug 2013, 12:44 AM
  4. Clarkson threaded tooling into ER Collets?
    By Com_VC in forum METALWORK GENERAL
    Replies: 10
    Last Post: 8th Mar 2012, 01:33 AM
  5. Clarkson chucks
    By Stustoys in forum METALWORK GENERAL
    Replies: 15
    Last Post: 26th Dec 2010, 09:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •