Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
Thread: Hare and Forbes tooling cabinets
-
16th Dec 2018, 10:46 AM #1Senior Member
- Join Date
- Nov 2012
- Location
- Blue Mtns
- Posts
- 115
Hare and Forbes tooling cabinets
I am tired of trying to make do with old cupboards etc and was thinking of biting the bullet and buying one or maybe two of there dedicated tooling cupboards. To start with one for the lathe on wheels with a backboard I have boards of tooling and tool holders and thought it’d be a good way to go.
Anybody have ave them or can advise what there like ?
-
16th Dec 2018, 11:43 AM #2
No idea on H&F ones, but the Maxim tool boxes are great and have stood up over time for me, and the larger draws have double bearing slides.
There side cabinets are around 460x460 and 860 high and are only around $300, slightly smaller but under half the price and free delivery most times through ebay.
There large 42 inch roll chest is only around $600
They have 4x8mm threads on each corner of the side cabinets for castor wheels (I've just separated one of mine and the castor's where only $20 from Bunnings)
Years ago when I bought mine I questioned them about the H&F tool chests which look the same, they replied to compare the weight of them to there's. As I found out there made of thicker sheet.Using Tapatalk
-
16th Dec 2018, 11:45 AM #3Member: Blue and white apron brigade
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 7,189
I had a look at the H&F cabinets when was buying for my electronics workshop.
One thing I noticed was the same set of drawers on wheels cost ~$100 more. Wheels (especially on line) are not that expensive. I ended up going for a pair of Sidchromes from Bunnings and put my own wheels on for about $25.
Before you buy anything make sure you work out what depth of drawers you need. Lots of shallow drawers are handy for showing/seeing smaller items but overall a cabinet with many shallow drawers won't store as much as those with deeper drawers.
-
16th Dec 2018, 01:12 PM #4Senior Member
- Join Date
- Dec 2013
- Location
- Sydney
- Posts
- 201
A few years ago I purchased one of these red tool trolleys for use as my main tool store (spanners, screwdrivers, hand punches, battery drills, etc.:
https://www.machineryhouse.com.au/T715
In my opinion it's crap. The drawers have never stayed closed with any certainty, so moving it around is risky unless you lock it because the drawers can slide open and the cabinet will tip over instantly, but the cheap lock mechanism doesn't always lock without some drawer wiggling and massaging of the lock barrel so locking it is not a quick operation. If I didn't need to keep the humidity out of my tools, I'd take the wheels of this cabinet and hide it away as stationary storage somewhere.
On the other hand, I got one of these grey cabinets to store larger mill tooling, big drills, taps and dies, etc. in:
https://www.machineryhouse.com.au/T764
It cost a lot more, but is a quality item. The drawers latch closed positively with a loud clunk every time. One day I will buy some more of this style, but a shed extension is needed first.
Graham.
-
16th Dec 2018, 01:19 PM #5Most Valued Member
- Join Date
- Jun 2007
- Location
- sydney ( st marys )
- Age
- 64
- Posts
- 4,890
You get what you pay for.
-
16th Dec 2018, 06:23 PM #6
-
16th Dec 2018, 06:27 PM #7
Just to add, my son's sidchrome tool box fell apart in his other work van (all the spot welds broke), there's no warranty for road use, it's in the warranty clause
Using Tapatalk
-
17th Dec 2018, 09:09 AM #8Most Valued Member
- Join Date
- Jul 2006
- Location
- Athelstone, SA 5076
- Posts
- 4,258
you are right of course... I bought a $96K in may...the GPS sucks..it has on many occasions has shown me to be offroad when I am on road...and also in the water when in fact I was at 500meteres from it...the airconditioning is great tho as are the leather seats...silly sunroof is blocked out by full length Rhino tradies rack...
-
17th Dec 2018, 06:22 PM #9
I've had one of the grey cabinets for 5 or 6 years now .
They are a excellent and heavy duty cabinet.
Expensive but they won't let you down.
https://www.machineryhouse.com.au/T764
MarkI've become a tool of my tools.
-
17th Dec 2018, 07:49 PM #10Senior Member
- Join Date
- Nov 2012
- Location
- Blue Mtns
- Posts
- 115
-
18th Dec 2018, 04:56 PM #11New Member
- Join Date
- Mar 2018
- Location
- NSW
- Age
- 30
- Posts
- 5
For proper heavy duty tooling cabinets you can’t beat the BAC systems gear but you definitely pay for it. We have heaps of BAC tooling cabinets and benches at work and they are sensational. We also have some of the grey hafco tooling ones you have mentioned, they are solid enough to load up with heavy tooling and are by all means adequate, but not BAC quality. I am currently thinking of buying one of the small hafco ones to slide under my workbench.
Keep an eye on gumtree and graysonline for the BAC cabinets, they will last a lifetime so you won’t go wrong buying secondhand, there was a few on gumtree last time I looked.
James
-
18th Dec 2018, 09:23 PM #12Senior Member
- Join Date
- Nov 2012
- Location
- Blue Mtns
- Posts
- 115
-
23rd Dec 2018, 02:41 PM #13Member
- Join Date
- Feb 2012
- Location
- Sydney
- Posts
- 67
I used to work at Tafe and we bought probably 30 of the Hafco TC750s and fitted them out as tooling cabinets for all the machines, mostly as lathe & milling cabinets. They stood up fairly well to the treatment students gave them; to date they're probably six years old and still going ok. We made mdf inserts for the top drawer mostly for measurement tools, stored 2 lathe chucks in the bottom drawer, fastened a 5-ply top to each cabinet to strengthen them as lathe chucks were plonked on them. The drawer runners sit in slots so you could move the different size drawers up or down according to your preference. Had to drill a few locks out when students lost keys but no big deal. Lockable castors worked fine. I've got a Maxxim tool chest at home for spanners etc and they're certainly good quality. Hafco's next sale is probably around Easter 2019 - approx 10% off. Hope this helps. - Peter
Similar Threads
-
Hare & Forbes sales?
By wm460 in forum METALWORK GENERALReplies: 4Last Post: 7th Jan 2013, 04:34 PM -
Hare and Forbes Asbestos warning
By Retromilling in forum METALWORK GENERALReplies: 51Last Post: 18th Nov 2010, 09:18 AM -
Hare & Forbes AL320 Lathe
By Big Shed in forum METALWORK GENERALReplies: 1Last Post: 24th Jul 2010, 10:07 PM -
Hare & Forbes Sale
By brisbanefitter in forum METALWORK GENERALReplies: 18Last Post: 14th Nov 2009, 10:28 PM -
Hare & Forbes Sales
By Matty5700 in forum METALWORK GENERALReplies: 3Last Post: 11th Mar 2009, 09:46 PM