Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: New Member
-
31st Dec 2015, 03:24 PM #1New Member
- Join Date
- Dec 2015
- Location
- Brisbane, Qld..
- Posts
- 6
New Member
Hi All,
I just joined yesterday to try and find a solution to a Transmig 195 problem.
The problem was found to be in the wire feed switch in that in would not function in the fourth speed position. When I say that it will not function, everything works except that there is no arc!
Aside from this I also an avid camera collector, being a member of Cameraholics here in Brisbane and also the American Pentax Forum.
Happy New Year All,
Regards,
Gordon.
-
31st Dec 2015, 05:17 PM #2Most Valued Member
- Join Date
- May 2011
- Location
- Murray Bridge S Aust.
- Age
- 71
- Posts
- 5,959
Welcome to a top forum Gordon.
When asking a question, could you please pick the correct section. Some people on here are really pedantic, (read PIDA) about things like that. You'll get used to it after a while and they forget that they were once new on here also.
Sound like a wire has come off the back of the switch for that setting. I'm useless at electronics so someone else may chime in with a better answer.
All the best to you for the New Year also.
KrynTo grow old is mandatory, growing up is optional.
-
31st Dec 2015, 05:34 PM #3Senior Member
- Join Date
- May 2013
- Location
- Rockhampton, QLD
- Age
- 68
- Posts
- 455
Welcome to the forum Gordon.
-
31st Dec 2015, 06:59 PM #4Most Valued Member
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 9,088
Welcome Gordon.
Similar Threads
-
new member I think not
By BobDowns100 in forum METALWORK GENERALReplies: 25Last Post: 16th Oct 2013, 05:37 PM -
New Member - Hi All!
By TAFE student in forum THE HERCUS AREAReplies: 0Last Post: 6th Aug 2012, 06:14 PM -
New Member.
By Shaun04 in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 11Last Post: 30th Oct 2004, 12:20 AM