Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 12 of 12

Thread: Linear actuator

  1. #1
    BobL is offline Member: Blue and white apron brigade
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    7,183

    Default Linear actuator

    I've been playing around with the 5 linear actuators I picked up for nicks from a recent treasure hunt.
    4 of them are 24V DC and one is a 220V AC
    All the motors are working but one 24V actuator has an shredded motor to internal gear coupling so it's not going anywhere.
    It looks like it would be possible to fix it with a bit of fiddling.
    2 of the other 24V units are working fine in both directions but the 4th one is stuck in the "in" position and as its a sealed unit its going to be hard to fix.

    The 220V unit was interesting - just a 3 pin plug/cord (no obvious switch) so after checking it wasn't short circuiting to ground I plugged it in and nothing happened.
    Checking it over I noticed a small rubber nipple with small two holes in it. On opening up the connection box I found the nipple was connected via two lengths of silicone tubing to a pair of microswitches which were clearly the fwd and rev switches. To test the unit out I pushed two plastic pipettes into the holes in the rubber nipple and found that the unit would switching by applying a slight pressure to either pipette. This unit has 200 mm travel at 6.3 mm/s and a max lift capacity of 60kg.

    Now what can I use them for?

    Attached Images Attached Images

  2. #2
    Join Date
    Oct 2011
    Location
    Norwood-ish, Adelaide
    Age
    59
    Posts
    6,542

    Default

    How about opening or closing vents on your shed ventilation/ dust control system?

    Michael

  3. #3
    jatt's Avatar
    jatt is offline Always within 10 paces from nearest stubby holder
    Join Date
    Aug 2008
    Location
    Bendigo
    Age
    51
    Posts
    760

    Default

    Seen em used to lift up the roof in place of cables in windup campers (caravans).

    Of course having 4 working units helps
    Frisky wife, happy life. ​Then I woke up. Oh well it was fun while it lasted.
    From an early age my father taught me to wear welding gloves . "Its not to protect your hands son, its to put out the fire when u set yourself alight".

  4. #4
    BobL is offline Member: Blue and white apron brigade
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    7,183

    Default

    Quote Originally Posted by Michael G View Post
    How about opening or closing vents on your shed ventilation/ dust control system?

    Michael
    Good idea for the shed vents, but they'd be to slow for ducting blast gates - I was going to have a crack some time at doing those pneumatically.

  5. #5
    Join Date
    Jan 2001
    Location
    Langwarrin, Victoria, Australia
    Age
    55
    Posts
    0

    Default

    A super accurate fine adjustment mech on a fence ? (Table saw, router table etc.)
    Glenn Visca

  6. #6
    BobL is offline Member: Blue and white apron brigade
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    7,183

    Default

    Quote Originally Posted by Glenn.Visca View Post
    A super accurate fine adjustment mech on a fence ? (Table saw, router table etc.)
    That's what I first thought off, but they quite slow and are not easily able to be as finely adjusted because when thy are turned off they continue to move for a fraction of a second so you have to sort guess where they will stop. The 24V DC units can be controlled by varying the V so they could be more rapidly moved approximately into place using a high V and then the V reduced so the arm travels much slower thereby controlling the final stopping position. It would be interesting to hook a set of digital position measurement arms up to them to see what sort of control, backlash and reproducibility could be obtained.

  7. #7
    Join Date
    Jun 2008
    Location
    Victoria, Australia
    Age
    74
    Posts
    5,080

    Default

    Hi Bob,

    I've got a few linear actuators, and one job I was planning to use them for is a small workshop lifting system. up to 100 Kg or so, a bit like a die trolley.. Sorry, no plans or details, just general ideas..

    Ray

  8. #8
    Join Date
    Aug 2011
    Location
    Melbourne
    Posts
    4,779

    Default

    Hi there
    I've got about 5 similar units. They are all 220v and came out of treadmills. They are used to raise/lower the deck to walk/run on incline. Still wondering what to use them for myself. They overheat if used continuously and have a duty cycle of about 1/10.

    Cheers

    Simon
    Girl, I don't wanna know about your mild-mannered alter ego or anything like that." I mean, you tell me you're, uh, super-mega-ultra-lightning babe? That's all right with me. I'm good. I'm good.

  9. #9
    BobL is offline Member: Blue and white apron brigade
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    7,183

    Default

    Quote Originally Posted by simonl View Post
    I've got about 5 similar units. They are all 220v and came out of treadmills. They are used to raise/lower the deck to walk/run on incline. Still wondering what to use them for myself. They overheat if used continuously and have a duty cycle of about 1/10.

    I have a couple of actuators from treadmills and they do indeed get hot pretty quickly.
    The ones I have are; 1/20 HP, 1/8 duty cycle and a throw of a about 100 mm.

    The 220V unit I described above is 300W and has a throw of 200 mm.

  10. #10
    Join Date
    Sep 2011
    Location
    Ballarat
    Age
    65
    Posts
    3,103

    Default

    Quote Originally Posted by simonl View Post
    Hi there
    I've got about 5 similar units. They are all 220v and came out of treadmills. They are used to raise/lower the deck to walk/run on incline. Still wondering what to use them for myself. They overheat if used continuously and have a duty cycle of about 1/10.

    Cheers

    Simon
    Hi Simon,
    What about using one as a belt tensioner when changing speeds on the pedestal drill

    Phil

  11. #11
    Join Date
    May 2011
    Location
    Murray Bridge S Aust.
    Age
    71
    Posts
    5,945

    Default

    You could use them to make an adjustable height bench, using a scissor type action.
    Kryn

  12. #12
    Join Date
    Aug 2011
    Location
    Melbourne
    Posts
    4,779

    Default

    Hi phil. That sounds like a novel idea. With all the other projects on my "to do" list, I cant ever see it happening!

    One thinfs for sure, the minute I throw them away I'll find a need for them!

    Simon
    Girl, I don't wanna know about your mild-mannered alter ego or anything like that." I mean, you tell me you're, uh, super-mega-ultra-lightning babe? That's all right with me. I'm good. I'm good.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •