Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4

Thread: Railing job

  1. #1
    Join Date
    May 2011
    Location
    Salem Ohio
    Age
    65
    Posts
    219

    Cool Railing job

    This is what i have been doing at work for the last few weeks. Normally we make these work platforms and they have 2x2 sq tube posts and welded cross bars from 1 1/2" tubing. This batch of platforms has 1 5/8" formed railing with cross rails that need coped. So i have like 390 rail sections to fit and tack together for the welders. Plus they have pockets that the rails sit in and need to all be removable. I have found the quickest way to cope the 1 5/8" tube is with a grinder and 36 grit sanding disc. Like 30 seconds per end. Just measure between the uprights and add 1/2". Then scribe a line 1/4" from the tube end and grind to the line while feathering to the center of the tube then roll the tube 180 degrees and do the other side. Piece of cake...Bob
    Attached Images Attached Images

  2. #2
    Join Date
    Oct 2011
    Location
    Norwood-ish, Adelaide
    Age
    59
    Posts
    6,541

    Default

    I'm glad someone else gets to do that and not me.
    So is the grind a straight one or is there some shape to it?
    Looks like it should work though. Do the welders have any problems with gaps?
    (I have one of those fancy hole saw things for shaping the tube ends but I don't think it does a better job than what you and TH62 have done with straight cuts.

    Michael

  3. #3
    Join Date
    May 2011
    Location
    Salem Ohio
    Age
    65
    Posts
    219

    Cool

    Nope no problems with the gaps with a mig. We have to use .045 gas flux core wire per shop rules. Yup they are ground straight across...Bob

  4. #4
    Join Date
    Jun 2011
    Location
    Australia east coast
    Age
    71
    Posts
    2,713

    Default

    Quote Originally Posted by Michael G View Post
    I'm glad someone else gets to do that and not me.
    You should see my boat safety railings.... and yes, all the cuts I did were straight across.

    PDW

Similar Threads

  1. Stainless hand railing
    By spooled in forum WELDING
    Replies: 22
    Last Post: 19th Aug 2008, 10:22 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •