Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Shun Shin SSB 15BH metal lathe
-
6th Mar 2012, 06:05 PM #1
Shun Shin SSB 15BH metal lathe
Hello everyone,
Would any one in the forum have any experience with the above lathe. I believe they are made in Taiwan. I know nothing of the quality or any problems they may have. Any information will be most appreciated.
Thanks FrankLast edited by flmath; 6th Mar 2012 at 07:45 PM. Reason: add picture
Nothing is as frightening as regret.
-
6th Mar 2012, 07:05 PM #2
Hi,
If this is the one listed on ebay (and has been for some time), without knowing anything about it i would say its FAR to pricey. If its not the one on ebay please ignore this post.
Ewan
-
8th Mar 2012, 11:15 PM #3Senior Member
- Join Date
- Sep 2008
- Location
- Queensland
- Posts
- 445
looks like that type was the norm in the 80's before geared head machines of the same size became more common. there is lots of information available on the net but they are all re-badged machines so the name means bugger all
search for "Jet lathe" of the same size Ie 12x36"happy turning
Patrick
-
8th Mar 2012, 11:36 PM #4
been cloudy
Not much SHUN SHIN around here lately . Been cloudy , damp and miserable for two weeks . I am coming down with a depression
regards ...Wung hung low