Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 7 of 7
  1. #1
    Join Date
    Apr 2008
    Location
    Canberra
    Posts
    805

    Default What type of oil can do I need

    My lathe has oil nipples that look like the attached photo. What sort of oil gun do I need for these? The ball bearing in the centre is spring loaded.

  2. #2
    Join Date
    Oct 2008
    Location
    Leopold, Victoria
    Age
    66
    Posts
    18

    Default

    I believe you need an oil pump type gun like this. They come with a pointy or radiused nozzle which will fit into your oil nipples. Should be available from the major lubrication equipment suppliers in Australia.

  3. #3
    Join Date
    May 2010
    Location
    Lower Lakes SA
    Age
    59
    Posts
    2,607

    Default

    I think we just had this conversation:
    spring loaded oilers

  4. #4
    Join Date
    Apr 2008
    Location
    Canberra
    Posts
    805

    Default

    Strewth...im not sure how I missed that post!

    Cheers fellas

  5. #5
    Join Date
    Aug 2008
    Location
    near Rockhampton
    Posts
    6,240

    Default

    I just use a bog standard oil can..... Point the nozzle into the ball and pump away...

  6. #6
    Join Date
    Aug 2008
    Location
    Adelaide
    Age
    69
    Posts
    1,393

    Default

    Quote Originally Posted by 19brendan81 View Post
    Strewth...im not sure how I missed that post!

    Cheers fellas
    Don't feel too bad - this topic pops up every year or so.

  7. #7
    Join Date
    Jun 2006
    Location
    Armidale
    Age
    60
    Posts
    155

    Default

    I just use a 10ml syringe and a blunt 18g needle. I can push the needle just pass the ball and squirt oil behind it .The only problem is is winter when the oil is cold it it harder to squeeze out of the syringe.
    Terry B
    Armidale

    The most ineffective workers will be systematically moved to the place where they can do the least damage - management.
    --The Dilbert Principle

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •