Results 1 to 10 of 10
  1. #1
    Join Date
    Nov 2017
    Location
    Geelong, Australia
    Age
    57
    Posts
    2,651

    Default One of the most handy tools in my workshop

    New to machining and have a mill or die grinder - you need to get one of these!!



    Nope - not the Tyre inflator

    Here’s a semi naked photo…



    And the tweezers that go with it for extracting the inevitable steel splinters that find their way into your hands



    The cover is a bit of rag I tied around it about 5 years ago to keep the dust off, and it’s worked so well I just kept it there. Just pushes back when you need to use it.
    The black button is the switch for the inbuilt light.

    It sits in the corner out of the way, at a nice height for surgery, plugged into the power point ready to go.
    Not a metalwork tool as such - but still a very valuable tool in the workshop.

    Steve

  2. #2
    BobL is offline Member: Blue and white apron brigade
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    7,182

    Default

    I've got something similar on my electronics bench but I found my main problem was just not having enough light.

    As soon as I upped the illumination over my electronics work bench I found I didn't need to use the magnifier anywhere near as often. In fact its been months since I needed to use it.

    Same in the shed. I was using head magnifiers but if the sun was shining I found it better to go outside and check out any items in sunlight. Have since upped the illumination so don't need to go outside as often

  3. #3
    Join Date
    Sep 2012
    Location
    York, North Yorkshire UK
    Posts
    6,439

    Default

    Hi Guys,

    Yes I've had one of those illuminated magnifying lens lamps for probably getting on for 40 years ! I bought it from Farnel Electronics before they became Element 14. Originally they resided above the Vicar Lane bus station before moving to Kirkstall road. They have since moved again.

    They still sell the lens for the lamps along with the circular florescent tubes. They were extremely expensive in those days, I've since bought an LED desk one from Aldi, a mere £20. Oddly enough the same size lens !
    Best Regards:
    Baron J.

  4. #4
    BobL is offline Member: Blue and white apron brigade
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    7,182

    Default

    One thing they are really good for is finding and helping remove splinters.

  5. #5
    Join Date
    Nov 2017
    Location
    Geelong, Australia
    Age
    57
    Posts
    2,651

    Default

    Quote Originally Posted by BobL View Post
    One thing they are really good for is finding and helping remove splinters.
    That’s 99% of what mine gets used for !!

    Steve

  6. #6
    Join Date
    Sep 2012
    Location
    York, North Yorkshire UK
    Posts
    6,439

    Default

    Hi Guys,

    Until I had my cataracts removed, mine was in regular use on the lathe ! Since then its been pushed aside not needed. You don't realise just how bad your eyesight has become until the cataracts have been removed.
    Best Regards:
    Baron J.

  7. #7
    Join Date
    Jun 2021
    Location
    Canberra
    Posts
    8

    Default

    I also have one over the workbench in the radio shack/lab. Gets in the way all the time so I might try and up the lighting instead.

    Unfortunately my most used "tool" in the shed is the scrap bin. For all those Doh! moments.

  8. #8
    Join Date
    Apr 2018
    Location
    Drouin Vic
    Posts
    633

    Default

    My wife presented me with one of those illuminated magnifiers a couple of years ago as a birthday present; at the time I was a little underwhelmed, but it gets used all the time and not least of all for removing splinters. It has a little area in the lens that is very high magnification and that is also often used. Has a flip-up cover over the lens so no rag required.
    As an aside, I find the best tool for splinter removal is an injection needle in about 18 or 20 gauge, they are beveled at the tip so the sides of the tip form a tiny, sharp cutting edge that is great for gentle probing, digging and picking out splinters be they the metal or wood variety.

  9. #9
    Join Date
    Oct 2015
    Location
    melbourne
    Posts
    473

    Default

    Splinter probes.
    Very handy...

  10. #10
    Join Date
    Nov 2007
    Location
    melbourne australia
    Posts
    3,228

    Default

    Quote Originally Posted by russ57 View Post
    Splinter probes.
    Well there you go. Had a million splinters and never heard of them.

    https://www.officeworks.com.au/shop/officeworks/p/first-aiders-choice-disposable-splinter-probes-10-pack-tr51650
    Chris

Similar Threads

  1. Handy bits of kit to make or modify for the workshop
    By KBs PensNmore in forum METALWORK GENERAL
    Replies: 3
    Last Post: 4th Oct 2019, 01:38 AM
  2. Handy
    By DSEL74 in forum THE SMITHY
    Replies: 8
    Last Post: 15th Jan 2015, 11:47 AM
  3. Replies: 16
    Last Post: 8th Jul 2013, 09:15 AM
  4. workshop draws for nuts bolts and small tools
    By 19brendan81 in forum METALWORK GENERAL
    Replies: 11
    Last Post: 29th Sep 2011, 03:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •