Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Bandsaw Guide Bolt !
-
28th Mar 2021, 08:00 PM #1
Bandsaw Guide Bolt !
Hi Guys,
Its is a good idea to replace the hex head bolt in the 6X4 bandsaw blade guides with hex cap screws ! It makes it much easier to adjust the guides without fiddling with an open ended wrench. I also used an adjustable wrench to twist the guide into position.
Grahame in "Metalwork General" posted a neat Idea for setting the guides using M4 cap screws.
https://metalworkforums.com/f65/t206449-horizontal-bandsaw-central-tips-tricks-mods
bandsaw-blade-guides-mod.jpg
Best Regards:
Baron J.
Similar Threads
-
Circle cutting guide
By Tuomas Soikkeli in forum METALWORK PROJECTSReplies: 0Last Post: 3rd May 2019, 07:17 PM -
Plasma guide
By Mike4 in forum METALWORK GENERALReplies: 6Last Post: 9th May 2016, 06:07 PM -
Hole saw guide
By bob ward in forum TIPS, TRICKS & HOW TO'SReplies: 0Last Post: 11th Mar 2016, 01:36 AM -
drill and tap guide?
By John H in forum METALWORK GENERALReplies: 20Last Post: 5th Sep 2009, 09:37 AM