Results 1 to 8 of 8
  1. #1
    Join Date
    Nov 2021
    Location
    Perth, Western Australia
    Age
    58
    Posts
    12

    Default Sheraton A 9" lathe for parts

    Howdy all,

    I have a Sheraton lathe (not complete) - but good for parts that I'd like to give to a Sheraton enthusiast.

    It's in Perth.

    Regards,
    Rhys

  2. #2
    Join Date
    Dec 2020
    Location
    Geraldton Western Australia
    Posts
    132

    Default

    Hi Rhys, do you have pictures? What parts are missing / still there etc.

    Regards Cam.

  3. #3
    Join Date
    Nov 2021
    Location
    Perth, Western Australia
    Age
    58
    Posts
    12

    Default

    Hi Cam,

    It started as a machine minus a motor and tailstock.

    As there appeared to be not interest - I was hours from throwing it in the skip (so had been stripping it further).

    Essentially there is the Bed, head stock, gearbox, lead screw....and 2/3 of the stand. The saddle assembly, gear cover and sundry parts I've just put in a box.

    What do you need?

    Rhys

  4. #4
    Join Date
    Nov 2021
    Location
    Perth, Western Australia
    Age
    58
    Posts
    12

    Default

    Hi Cam,

    Most of the lathe was all there…..minus the tail stock, motor and half the stand. It was hours away from going in the skip – so I stripped what I thought could live on.

    There is now the bed, head stock, gearbox, leadscrew and half the stand. (the bits removed are just in a box)

    What bits do you need?

    Regards,
    Rhys

  5. #5
    Join Date
    Jan 2004
    Location
    Mackay North Qld
    Posts
    6,446

    Default

    Hi Rhys,

    Welcome to the MetalWork Forums.

    Thank you for your thoughtfulness in offering the Sheraton spares to those in the forum.

    I am sure members shall reciprocate should you need help in the future.We have quite a few members in Perth.

    To assist you to find your way around the sub forums see below.

    Go to the FORUM box at top LH corner and click on it.

    A drop down menu appears and you can select Forum Home at the top of the drop down menu list. Scan down through the pages to look at what we have.

    Please make sure read the Terms of Use -our Rules - at the top of the scroll down page- pretty standard for many forums these days.By joining the forum its automatic that they apply to you as a member.

    Sometimes the soft ware works so you can't post pics or links until 10 posts are made ( or such links and pics are cleared by a mod)

    Its anti spam thing.

    There's a number of sub forums forum that might be parallel with your interest found as described above.

    You might consider narrowing down the location to the suburb you are in. Its possible to have another member living in the next suburb over and opportunities to borrow a tool or get some help are greatly improved.

    If any questions contact me via PM and I'll try to help you.

    Thanks again for your kind offer.

    Grahame

  6. #6
    Join Date
    Aug 2006
    Location
    Melbourne
    Posts
    1,105

    Default

    Maybe some photos of what's there would spark some more interest.

    Sent from my SM-G935F using Tapatalk

  7. #7
    Join Date
    Dec 2020
    Location
    Geraldton Western Australia
    Posts
    132

    Default

    It's found a new home.

  8. #8
    Join Date
    Nov 2021
    Location
    Perth, Western Australia
    Age
    58
    Posts
    12

    Default

    Thank you for the kind words Grahame,

    As stated by Cam – the Sheraton has moved to its new custodian. (I have a 1968 Hercus 9”AR)

    Interestingly…….at least to me, this Sheraton lathe had the original supplier plate attached to it.

    The Carlyle name actually dates back to 1926 – they merged with Atkin & Co in 1971 to become Atkins Carlyle. Atkins Carlyle were acquired by Blackwoods in 2001.

    Regards,
    Rhys

    20211219_113703.jpg

Similar Threads

  1. Looking for Sheraton parts
    By daggagh in forum SHERATON AREA
    Replies: 0
    Last Post: 5th Nov 2019, 12:26 PM
  2. Wanting to buy a gear cover/guard for a Sheraton 9" Lathe
    By BrazOmatic in forum WANTED TO BUY
    Replies: 4
    Last Post: 7th Feb 2019, 09:05 PM
  3. Phosphating parts "experiment"
    By Pete F in forum METALWORK GENERAL
    Replies: 43
    Last Post: 17th Nov 2014, 10:46 PM
  4. Sheraton 4 1/2" revival.
    By _AL_ in forum THE HERCUS AREA
    Replies: 22
    Last Post: 7th Feb 2012, 06:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •