Thanks: 0
Needs Pictures: 0
Results 1 to 6 of 6
Thread: slotted spanner?
-
21st Oct 2019, 01:40 AM #1Novice
- Join Date
- Oct 2019
- Location
- walllan, Australia
- Age
- 62
- Posts
- 11
slotted spanner?
Anyone have a source for a set of the 'slotted spanner bits" for removing the slotted retaining nuts on the end of the ball crank handles (imperial 1/2", nut diameter, not thread size)
A search of ebay comes up with 20,000 screwdriver bit hits LOL
regards
JD
-
21st Oct 2019, 04:40 AM #2
Hi Daggagh,
Do you mean these
crown-bolt-driving-bits-65578-64_400_compressed.jpg
If so I got mine with a set of security tool bits.Best Regards:
Baron J.
-
21st Oct 2019, 07:49 AM #3Mechanical Butcher
- Join Date
- Oct 2004
- Location
- Southern Highlands NSW
- Posts
- 1,898
Grind a gap into the end of a blade screwdriver?
-
21st Oct 2019, 08:11 AM #4
Hi daggah
With reference to BaronJ 's post. If your spanner /screwdriver is the same that he is talking about?
Are you close to a Bunnings shop ?
They have them ,albeit in a set of bits.
There's at least one in the set and the remainder of the flat bits could be ground to custom sizes.For something larger you may well have to make your own .
I think that using an unwanted bit from the set, an extra piece of steel-maybe from an old spanner (chrome vanadium) could be welded to it and then ground to size.
There's always a way to do these things.
The one I have comes in the set shown , see link below.
Grahame
https://www.bunnings.com.au/craftrig...t-set_p6320526
-
21st Oct 2019, 12:50 PM #5Senior Member
- Join Date
- Nov 2011
- Location
- Port Sephens NSW Southside
- Posts
- 123
Hi Daggagh,
Jaycar have this set cat: TD2035 $$16.95, Altronics Cat T2180 at Auburn have it for $13.95.
JohnQ
-
22nd Oct 2019, 03:03 PM #6
Hi daggah,
Would this be the type of slotted retaining nut that you refer to?
Grahame
slotted nuts.jpg
Similar Threads
-
Tee Slotted Cross Slide to suit Hercus Imperial Lathe 260/9".
By pipeclay in forum METALWORK - Machinery, Equipment, MARKETReplies: 4Last Post: 2nd Jun 2018, 05:55 PM -
Hercus Tee slotted crosslide
By pipeclay in forum METALWORK - Machinery, Equipment, MARKETReplies: 1Last Post: 2nd May 2018, 10:58 PM -
Slotted plate Beaufort division DAP
By zbm in forum EBAY, GUMTREE, and other off forum sales sitesReplies: 0Last Post: 5th Apr 2017, 08:28 AM -
hercus t-slotted crosslide
By allterrain50 in forum THE HERCUS AREAReplies: 61Last Post: 13th Mar 2017, 12:29 AM -
small steel round head slotted wood screws #2, #3, & #4
By eskimo in forum METALWORK GENERALReplies: 28Last Post: 26th Nov 2013, 09:08 PM