Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
9th May 2022, 07:13 PM #1
Lacing the spokes of a bicycle wheel using 4X pattern
My son visited my workshop and laced a bicycle front wheel.
He is using the 4-cross pattern this time.
The spokes are beefier than normal since I have a lot of weight on me.
There is also going to be a special roller brake in order to be able to stop my mass safely.
My intention is to loose some of my weight by bicycle excercise.
The video is here
-
1st Jun 2022, 07:10 AM #2
How to install a Shimano Nexus roller brake to Nishiki 722 cross hybrid bike
My bike has the conventional front brake that will eventually grind the front wheel rim dangerously thin.
To avoid this I change the entire front wheel to one that can accommodate a roller brake.
Roller brake is very durable and has closed construction which keeps water and dust out of the operating surfaces.
I want to keep the tires so I will take off the tires and reuse them on the new wheel.
Here is the actual video
Similar Threads
-
Spokes ain't good spokes sometimes.
By Hoggo1951 in forum AUTO RESTORATIONReplies: 0Last Post: 31st Jan 2022, 08:43 PM -
Bicycle stand plans
By bwal74 in forum WELDINGReplies: 0Last Post: 19th May 2020, 01:49 PM -
Brazing for bicycle frames
By nomenklatura44 in forum WELDINGReplies: 7Last Post: 12th Oct 2008, 10:11 PM -
My brother's new bicycle
By bitingmidge in forum METALWORK GENERALReplies: 22Last Post: 23rd Oct 2006, 11:29 AM