Thanks: 0
Needs Pictures: 0
Results 1 to 2 of 2
-
24th May 2021, 03:31 PM #1
Home Made Steam Driven Trip Hammer doing some work flattening out 1.5mm and 3mm thick
Home Made Steam Driven Trip Hammer doing some work flattening out 1.5mm and 3mm thick wire solder.
This is fun steam driven accessory to use, a bit hard on the ears though!
-
26th May 2021, 10:30 AM #2
I have been trying to buy some of those paper caps in a roll that we all used to use in our cap guns as kids. I hadn't seem them for years because the cap guns of today use those plastic cylinders of caps.
I was able to find some old stock of rolls of paper caps and they should be here next week, big kid I know but I cant wait to put a line of them under those hammers
Similar Threads
-
DIY Steam Trip Hammer powered by Jensen 20G Steam
By Jim Ferrous in forum Members VideosReplies: 2Last Post: 20th May 2021, 05:55 PM -
Home made U bolts Vs buying ready made
By gazza2009au in forum TRAILERS & OTHER FABRICATED STUFFReplies: 13Last Post: 14th Aug 2019, 05:17 AM -
Jensen 20G Model Steam Engine Running DIY Steam Hammer
By Jim Ferrous in forum METALWORK GENERALReplies: 6Last Post: 20th Mar 2016, 05:29 PM -
trip hammer
By Marc in forum THE SMITHYReplies: 16Last Post: 3rd Nov 2014, 11:18 AM -
Steam power at work
By rascal in forum METALWORK GENERALReplies: 16Last Post: 23rd May 2013, 01:20 PM