Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Lifting support with jack stands
-
22nd May 2020, 06:35 PM #1Senior Member
- Join Date
- Apr 2019
- Location
- Finland
- Age
- 46
- Posts
- 117
Lifting support with jack stands
Hi
This is a video about making lifting support and jack stands for car lifting.
Width can be adjusted, so its easy to find optimal lifting points. Can be used for lifting from skirt, or under the the car.
-
23rd May 2020, 04:14 AM #2Senior Member
- Join Date
- Apr 2019
- Location
- Finland
- Age
- 46
- Posts
- 117
Safety pins.
Even that its really difficult to remove pin, when there is weight on it. Personally i think, nearly impossible.
But, because there is always that small possibility, i made new safety pins for the stands.
12.jpg11.jpg
Now, its really difficult to even imagine that pins could be removed accidentally when there is weight on the stands.
You really need to work for it to make it happen.
-
24th May 2020, 03:06 AM #3Senior Member
- Join Date
- Apr 2019
- Location
- Finland
- Age
- 46
- Posts
- 117
Instructable:
https://www.instructables.com/id/Lif...r-Car-Lifting/
Ps. i'm not good about writing instructions, fixes, feedback etc is always wanted.
Similar Threads
-
Mill stands for a RF45 - Metex, H&F ?
By takai in forum METALWORK GENERALReplies: 7Last Post: 16th Mar 2020, 06:18 PM -
Making heavy machinery stands mobile?
By takai in forum METALWORK GENERALReplies: 32Last Post: 16th Mar 2020, 02:25 PM -
VICTORIA comparator stands and muir dails.
By azzrock in forum METALWORK - Machinery, Equipment, MARKETReplies: 4Last Post: 27th Apr 2012, 04:33 PM -
Scored a Pallet Jack (Lifting/Moving Machines)
By Bryan in forum METALWORK GENERALReplies: 31Last Post: 16th Aug 2011, 08:51 AM -
The last of the plant stands
By artemis in forum METALWORK GENERALReplies: 10Last Post: 23rd Jul 2007, 10:38 AM