Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 1 of 1
  1. #1
    Join Date
    May 2008
    Location
    Perth
    Posts
    241

    Default WIA fine voltage switch

    Hi all,

    On a long-shot, I was wondering if by any chance someone might know what position each pole is meant to be in relation to each other in the Fine voltage cam switch in a WIA Weldmatic 335.

    I made a big boo-boo yesterday. The switch was only allowing me to move between 5 to 9, and I decided I'd see if I could find the cause within. After partially separating it, I decided to test the range of movement of the first two poles, and it was only after I finished clicking it back and forth a few times that I realised "There aren't any markings to denote each poles offset, oh bother"

    My next course of action will be to contact WIA, and possibly Kraus & Naimer to see if they would be willing to help me.

    At the very least, it's a lesson learned for when I do the same with the coarse adjustment switch

Similar Threads

  1. How to cut very fine channels in copper?
    By Digital in forum METALWORK GENERAL
    Replies: 20
    Last Post: 21st Nov 2017, 01:21 PM
  2. Switch Enclosure- Switch Position Identification.
    By Anorak Bob in forum METALWORK GENERAL
    Replies: 17
    Last Post: 19th Jul 2016, 11:00 AM
  3. Interface 3ph rotary switch with low voltage
    By variant22 in forum METALWORK GENERAL
    Replies: 29
    Last Post: 15th May 2015, 11:45 PM
  4. Metric Left Hand Nut - Fine Thread
    By electrosteam in forum METALWORK GENERAL
    Replies: 3
    Last Post: 2nd Mar 2012, 12:41 PM
  5. Cutting very fine threads
    By funkychicken in forum METALWORK GENERAL
    Replies: 11
    Last Post: 12th Oct 2008, 06:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •