Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Help Identify and wire motor
-
28th May 2019, 03:36 PM #1Member
- Join Date
- Apr 2018
- Location
- Sydney
- Posts
- 64
Help Identify and wire motor
Hi,
I have this large what looks to be a DC motor (BLDC?)
It is bolted inside a machine at the moment so these are the best pictures I can get.
I managed to use a mirror to take a picture of the ID plate for the motor.
In the junction box there are wires labeled T1, T2, A1, C1, E1, E2.
T1/T2 and A1/C1 have continuity while E1 and E2 does not have continuity and also does not have ground leakage.
Can anyone help identify the type of motor and how to test it?
Thanks
motor.jpgtest.jpg
-
28th May 2019, 04:19 PM #2Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 6,218
If F means the field voltage at 200V and A means armature voltage of 160V then like a 10EE lathe it will need a complicated controller.
I take it it is off something with variable speed and lots of torque down low.Gold, the colour of choice for the discerning person.
Similar Threads
-
Delta wire bridgeport motor
By StrayAlien in forum ELECTRICALSReplies: 12Last Post: 26th Mar 2018, 08:20 AM -
Can I wire this 3ph motor to VFD?
By GDD in forum METALWORK GENERALReplies: 3Last Post: 2nd Nov 2015, 06:44 AM -
Is a motor start relay switch needed for a 3ph 2.8kw pump motor?
By Ben Dono in forum METALWORK GENERALReplies: 26Last Post: 14th Aug 2015, 02:38 PM -
uni-nig 250 new wire drive motor unit wanted
By Toggy in forum WELDINGReplies: 16Last Post: 24th Nov 2012, 09:47 PM