Needs Pictures: 0
Results 61 to 62 of 62
-
27th May 2021, 12:15 PM #61New Member
- Join Date
- May 2021
- Location
- USA
- Posts
- 1
Isacon 7.5kw
I recently purchased a VFD manufactured by Isacon
7.5kw single phase 60hz (US) input.
I am running a 7.5hp bandsaw with a 1725rpm 3ph
motor.
I did bypass the magnetic start switch on the saw for
testing.
It is now running well, thanks to all who have posted
hints, clues, and info on this thread.
Settings as follows:
Pn01 1 Pn13 0 Pn25 60
Pn02 60 Pn14 70 Pn26 70
Pn03 2 Pn15 30 Pn27 10
Pn04 1 Pn16 0 Pn28 3
Pn05 3 Pn17 30 Pn29 2
Pn06 2 Pn18 0 Pn30 2
Pn07 1 Pn19 1 Pn31 1
Pn08 10 Pn20 10 Pn32 1
Pn09 10 Pn21 20 Pn33 32U29
Pn010 60 Pn22 30 Pn34 0
Pn011 1.5 Pn23 40 Pn35 65535
Pn012 60 Pn24 50
-
27th May 2021, 02:00 PM #62
Hi Wade 84
Welcome to the MetalWork Forums,
We have some fine folks here who are supportive friendly and helpful.
Please take the time to navigate around the forums to view the varied and interesting subjects.
There is a dedicated Hercus Forum here so there is a good place to start.
To do this, goto the the FORUM box in the top left hand corner of the screen. Click Forum Home and a scroll down page will come up.
Scroll down the page and the various help pages and sub forums shall be shown.
Please read the Terms of Use on the very top of the scroll down page - they are our rules.
To save time heres the link
https://metalworkforums.com/f90/t197...terms-tou-read
Many pages also have a sticky at the top.If you post its always a good idea to check the sticky ,if there is one there.
Please post any questions in the appropriate MetalWork forum.
Again, welcome to our forums.
Grahame
moderator
Similar Threads
-
Looking for tool advise
By Lagair in forum METALWORK GENERALReplies: 8Last Post: 6th Aug 2018, 09:23 PM -
Advise On Trailers
By Christos in forum TRAILERS & OTHER FABRICATED STUFFReplies: 17Last Post: 18th Feb 2018, 09:49 AM -
Very first TIG welds. please advise
By Zumanity in forum WELDINGReplies: 5Last Post: 9th May 2014, 03:28 PM -
advise need please
By boyblueeye in forum WELDINGReplies: 8Last Post: 13th May 2012, 12:22 AM -
Powdercoating advise
By Geoff Dean in forum METALWORK GENERALReplies: 7Last Post: 26th Jan 2006, 11:03 PM