![Likes](https://metalworkforums.com/dbtech/thanks/images/likes.png)
![Needs Pictures](http://metalworkforums.com/images/smilies/happy/photo3.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 8 of 8
Thread: Metal Dust Issues
-
7th Mar 2016, 11:12 AM #1
Member: Blue and white apron brigade
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 7,189
Metal Dust Issues
About 18 months ago the mens shed managed to pick up a 2HP, "made in Poland", used, metal dust extractor. It looks like a wood working dust collector but is has an all plastic impeller housing, blade and filter holder. The unit still had a plastic collection bag attached with about 25kg of metal dust in it, which we left behind. The air filter is a pleated paper filter type which was choked with grey dust, and although it clearly has collected a lot of metal dust it still looked in pretty good condition.
Since obtaining the metal dust extractor we have not had anywhere to put it in the shed so it has been in storage mainly in our sea container and wherever we have put it, over time the air filter has left a grey dust shadow.
Last Friday my conscience got the better of me so I finally took the extractor outside and took the filter off. Clouds of grey dust went everywhere so I put on a dust mask and tipped the filter over into a rubbish bin. More dust everywhere. Then I placed the filter on grass away from the building and tapped the wire cage side of the filter with a stick - more dust. Tipping the filter upside down so I could see inside it and saw that there was a lot of fluffy cloth fibres clogging the insides of the filter which I reckon were buffing wheel fibres. To loosen these fibres and dust I used a dust pan brush. This also released a lot more dust that got all over exposed skin and hair (as usual I was wearing shorts). Although it needs more cleaning I was getting worried about the dust so I bagged the filter up in a plastic rubbish bag and put it away.
Within minutes of the dust exposure I started to itch (like you get from fibreglass) and when I took the dust mask off I also started to cough and realized I was breathing the dust in that had settled all over my clothes. I went outside the shed and dusted myself down which helped with the cough, but then I developed a light red rash like sunburn on my hands and arms. At that point I decided to go home and take a shower and wash my clothes. By the time I got home (10 minutes away) my whole body (even inside my jocks) was itching. After I took a shower I felt a lot better but I was still itching a bit 24 hours later. Now the rash and itch have gone.
I know the unit had been used mainly to sand and buff SS but it is possible some other materials were used. My total exposure time to the filter (from taking it off the dust collector to bagging it up) would have been less than 5 minutes but it was not an experience I would like to repeat.
The filter needs more cleaning but next time I tackle it will be wearing a full overalls, gloves, and my Triton full face dust mask.
-
10th Mar 2016, 11:01 AM #2
Sounds like a horrible experience and judging by it I would consider looking into the replacement cost of a new filter and discarding this one as is in it's bag rather than risk further exposure to unknown substances.
…..Live a Quiet Life & Work with your Hands
-
10th Mar 2016, 02:49 PM #3
When I first read this I wondered what could cause a rash like that. "fluffy cloth fibres". Fibreglass was the first thing that came to mind, but it could be anything including asbestos.
Dean
-
10th Mar 2016, 05:53 PM #4
-
10th Mar 2016, 06:53 PM #5
Member: Blue and white apron brigade
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 7,189
The metal dust collector comes from a hospital auxiliary facility ( 4 rooms) for making supports and braces for ankle/knee/neck/shoulder/back etc. The facility was vacated several months earlier and our mens shed was invited to help ourselves to anything we liked. He picked up a heap of SS strap/rod and bar which is what many of the supports were being made out of. There was a large (5HP?) exhaust fan that vented the whole facility and the small 2HP DC was set up next to what had been a row of grinders and buffs (unfortunately not present) although we did score a number of polishing wheels and mops.
It's most likely fibre glass bonding material in grinding wheels. I agree that we should discard this filter and will be recommending this to the committee.
-
10th Mar 2016, 07:11 PM #6
Bob, a lot of surgical metal (if some of what they were making or modifying) contains cobalt, chrome and molybdenum. All of these as you know are potentiall harmful. I would be quite cautious.....
Cheers, Joe
retired - less energy, more time to contemplate projects and more shed time....
-
10th Mar 2016, 07:42 PM #7
Member: Blue and white apron brigade
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 7,189
-
10th Mar 2016, 09:51 PM #8
I think that's wise.... if you can't tell what's been collected in there. Inhaling dust of some of the metals used in healthcare/medicine can be hazardous, even without considering the waste from nuclear medicine
Cheers, Joe
retired - less energy, more time to contemplate projects and more shed time....
Similar Threads
-
Dust and VFD's
By Michael G in forum METALWORK GENERALReplies: 11Last Post: 22nd Apr 2014, 02:48 PM -
Metal dust measurements1
By BobL in forum METALWORK GENERALReplies: 12Last Post: 31st Mar 2014, 09:01 PM -
Metal dust extraction for linisher
By jack620 in forum METALWORK GENERALReplies: 17Last Post: 27th May 2013, 10:06 AM -
Bitza has bitz the dust
By bitza500 in forum THE HERCUS AREAReplies: 6Last Post: 28th Apr 2009, 06:41 PM