Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: coventry die head chasers
-
3rd Oct 2020, 08:14 PM #1Intermediate Member
- Join Date
- Jun 2020
- Location
- Geelong VIC
- Age
- 67
- Posts
- 25
coventry die head chasers
Hi all, looking for some chasers to complete my set for my 1/2 inch Coventry die head, anyone got some for sale or multiple sets?
I have extra sets in some sizes, so could do a swap etc.
I also have 3/4 1 and 1 1/2 inch heads with some chasers I do not currently use.
Thanks... Steve
-
4th Oct 2020, 10:07 AM #2Diamond Member
- Join Date
- Mar 2014
- Location
- South of Adelaide
- Posts
- 1,225
What sizes do you want? If its imperial i will probably have some i will part with.
-
4th Oct 2020, 03:02 PM #3Intermediate Member
- Join Date
- Jun 2020
- Location
- Geelong VIC
- Age
- 67
- Posts
- 25
snaptap... thanks for reply. about to check what I need, have a job coming up to make some BSF studs for a guy repairing British bikes, but only have 7/16 BSF... so will need 1/4, 5/16, 3/8, 1/2 and 5/8 inch to complete that range. am also missing 5/8 UNF (think I have all the other UNF sizes, as well as the BSW.
As I said just about to sort out the box of chasers and get an idea of the ones I'm missing.
Should have checked the chasers when I got the die head a few years ago... but naturally tooling just sits in the locker until you need to use it... about time I sorted the "toys" accumulated over the years.
Have the correct Coventry grinding jig for sharpening as well if you need yours sharpened?
Again thanks for getting back to me...
Steve Leith.
-
6th Oct 2020, 05:44 PM #4Diamond Member
- Join Date
- Mar 2014
- Location
- South of Adelaide
- Posts
- 1,225
-
6th Oct 2020, 09:26 PM #5Intermediate Member
- Join Date
- Jun 2020
- Location
- Geelong VIC
- Age
- 67
- Posts
- 25
snaptap... thanks for the reply bud. handy little die head to have... but a bit like a bath without the plug, not having the chasers to suit. I just went through what I have (and have not) and need BSF 3/16, 1/4, 5/16, 3/8, 1/2, 9/16 and 5/8. UNF 1/4, 5/16 and 5/8. BRASS I have noting at all, so anything would be an addition. I think the guy I got the head from must have been just cutting metric and pipe fittings... as I have several sets of ISO 12 if you need a set?
Again thanks for the reply... steve
-
11th Oct 2020, 10:34 AM #6Intermediate Member
- Join Date
- Jun 2020
- Location
- Geelong VIC
- Age
- 67
- Posts
- 25
-
11th Oct 2020, 11:30 AM #7Member
- Join Date
- Jan 2017
- Location
- Bunbury
- Posts
- 63
-
11th Oct 2020, 05:43 PM #8Intermediate Member
- Join Date
- Jun 2020
- Location
- Geelong VIC
- Age
- 67
- Posts
- 25
Similar Threads
-
Thread Chasers
By Gaza58 in forum METALWORK GENERALReplies: 7Last Post: 15th Jun 2019, 10:38 AM -
Whitworth Chasers
By kenny_10 in forum METALWORK GENERALReplies: 1Last Post: 3rd Jul 2018, 03:48 PM -
Thread chasers
By 4-6-4 in forum METALWORK GENERALReplies: 2Last Post: 2nd Aug 2012, 03:51 PM -
thread chasers.
By tea lady in forum METALWORK GENERALReplies: 9Last Post: 20th Jun 2012, 09:07 PM -
Chasers
By bob colles in forum METALWORK GENERALReplies: 5Last Post: 18th Apr 2011, 04:59 PM