Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
30th Sep 2020, 08:19 PM #1Member
- Join Date
- May 2012
- Location
- Dandenong
- Posts
- 76
Chasing metal plate approx 900 x 600 x 12-15mm thick
Hi all, long shot but I'm after a sheet of metal around 900 x 600 x 10 to 15mm thick to support a flypress on a mobile stand I'm working on, and it seems hard to find a sheet at a decent price. So far the few places around Dandenong that would give me a price have quoted:
2400 x 1200 x 10 - $330inc (won't cut though)
900 x 600 x 10 - $190inc (note above cost!)
900 x 600 x 12 - $220
900 x 600 x 15 - $264
Does anyone not too far from Hawthorn or Dandenong have a sheet roughly anywhere near that size they'll sell (I can cut it down), closer to the 15mm if possible, or can recommend a supplier near Dandenong or thereabouts that can at a reasonable price?
I'm in for a penny with this project but don't want to go too ballistic on the costs, as I'm sure I'm very over engineering it anyway.
cheers, Ian
Similar Threads
-
Chasing steel plate approx 900 x 600 x 10-15mm thick
By aarggh in forum WANTED TO BUYReplies: 0Last Post: 1st Oct 2020, 01:32 PM -
Chasing ideas for a sort of Friction plate material
By BobL in forum METALWORK GENERALReplies: 13Last Post: 22nd Feb 2017, 12:04 AM -
cutting thick plate (50mm) with oxy
By .RC. in forum WELDINGReplies: 5Last Post: 23rd Dec 2011, 07:48 PM -
Suppliers of small quantites of thick Aluminium plate
By chrisw in forum METALWORK GENERALReplies: 3Last Post: 15th Jan 2010, 10:14 PM -
Need advice on drilling thick metal.
By andycapp in forum METALWORK GENERALReplies: 16Last Post: 23rd Oct 2007, 04:00 AM