Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Brass Thread Taps 26 TPI
-
11th Aug 2020, 10:28 AM #1Senior Member
- Join Date
- Jul 2010
- Location
- Brisbane
- Posts
- 143
Brass Thread Taps 26 TPI
Hi..
Need ..3/16 T & D
5/16 Die.
3/8 T & D.
7/16 T & D.
1/2 T & D.
Ken.
-
11th Aug 2020, 06:25 PM #2Most Valued Member
- Join Date
- Mar 2011
- Location
- Southern Flinders Ranges
- Posts
- 1,553
-
20th Aug 2020, 05:51 PM #3Senior Member
- Join Date
- Jul 2010
- Location
- Brisbane
- Posts
- 143
-
24th Aug 2020, 08:56 PM #4future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,598
I should have all the taps your looking for. Will have to double check though. No dies unfortunately
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
4th Oct 2020, 05:11 PM #5future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,598
I've got all the taps minus 3/16
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
Similar Threads
-
brass thread taps and dies
By kenny_10 in forum METALWORK - Machinery, Equipment, MARKETReplies: 1Last Post: 9th May 2018, 10:34 AM -
Brass all-thread on sale at Bunnies
By jack620 in forum METALWORK GENERALReplies: 9Last Post: 6th Oct 2017, 08:53 PM -
Brass Taps
By bob colles in forum METALWORK GENERALReplies: 9Last Post: 31st Aug 2011, 01:10 AM -
Brass 26 TPI Taps
By bob colles in forum METALWORK GENERALReplies: 0Last Post: 20th May 2011, 12:57 AM -
The Difference between Quality and Cheap Thread Taps
By hux in forum METALWORK GENERALReplies: 12Last Post: 10th Nov 2007, 09:55 AM