Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
30th Oct 2019, 11:11 PM #1New Member
- Join Date
- Sep 2019
- Location
- Melbourne
- Age
- 55
- Posts
- 6
Looking for some Bronze Round stock
Hi Everyone,
I'm after a piece of Bronze stock to make a sleeve for a shaft bearing.
Need a bit approx 6 cm long, 30mm diameter if anyone has some?
TIA
-
15th Nov 2019, 04:22 PM #2Most Valued Member
- Join Date
- May 2011
- Location
- Murray Bridge S Aust.
- Age
- 71
- Posts
- 5,959
Hi Frank, I can get some Aluminium Bronze approx 50 diam X 175 long if that helps.
Unfortunately the cost will be around the $45.00 mark. That was the smallest diameter stuff he had.
KrynTo grow old is mandatory, growing up is optional.
-
15th Nov 2019, 06:04 PM #3Most Valued Member
- Join Date
- Nov 2017
- Location
- Geelong, Australia
- Age
- 57
- Posts
- 2,672
I've got some hollow bar that might do.
Roughly what are your finished ID and OD's?
Steve
-
15th Nov 2019, 10:21 PM #4New Member
- Join Date
- Sep 2019
- Location
- Melbourne
- Age
- 55
- Posts
- 6
All Sorted - Thanks for your replies
Thanks everyone - managed to locate some stock.
Time to get to work, no excuses now!
Similar Threads
-
Turning shallow domes on the ends of 316 SS round stock
By bob ward in forum METALWORK GENERALReplies: 10Last Post: 10th Nov 2019, 07:46 PM -
Cross Drilling Holes in Round Stock
By familyguy in forum METALWORK GENERALReplies: 4Last Post: 16th Aug 2019, 09:37 AM -
Availability of 7/8 X 14 UNF round stock--
By Briangoldcoast in forum METALWORK GENERALReplies: 20Last Post: 15th Apr 2019, 08:09 AM -
Drilling and tapping jig for round stock.
By aametalmaster in forum METALWORK GENERALReplies: 18Last Post: 8th Mar 2012, 09:09 PM -
Round and squire bar stock wanted
By STEAM in forum METALWORK GENERALReplies: 4Last Post: 2nd Nov 2008, 10:04 PM