Needs Pictures: 0
Results 1 to 13 of 13
Thread: Sharpening expandable reamers
-
6th Feb 2022, 08:18 PM #1
Sharpening expandable reamers
This project was inspired by a youtube video tube which I can't find again, the finger tool is my contribution.
Unfortunately I have to shim the magnetic vee blocks to suit each the particular reamer.
The finger tool is hinged so the reamer can be rotated anti-clock wise then back against the next blade to index it.
Not perfect but with careful technique it will revitalize my blunt reamer collection.
Ive only sharpened one so far and I haven't tested it, but I know it will cut once again.
MarkI've become a tool of my tools.
-
6th Feb 2022, 09:54 PM #2Most Valued Member
- Join Date
- May 2011
- Location
- Murray Bridge S Aust.
- Age
- 71
- Posts
- 5,959
VERY NICE WORK. Any chance of some better pics of the finger tool, like what's on the other side, PLEASE?? How does it rotate to allow the next blade through, please?
KrynTo grow old is mandatory, growing up is optional.
-
6th Feb 2022, 10:02 PM #3
Hi Mark.
Ingenious and nicely executed.
I too have a collection of blunt reamers - and have a small tool & cutter grinder and access to a surface grinder.
Can you explain a little about the geometry of your grinds?
My understanding is that adjustable reamers have a very slightly tapered section to around a third of the length of the blades and then are dead parallel for the remaining two thirds.
I am also under the impression that their cutting edges are relieved slightly. I thought that this was a curved relief.
Very interested to learn more about the geometry and how their shape is restored.Cheers, Joe
retired - less energy, more time to contemplate projects and more shed time....
-
6th Feb 2022, 10:43 PM #4
Geometry?
Joe I had no idea about the geometry I didn't give it much thought.
I clocked it and sharpened it parallel now I will have to re- mount it and cut a taper.
The reamer I used was so blunt it was useless so I had nothing to lose.
MarkI've become a tool of my tools.
-
7th Feb 2022, 01:26 AM #5
Hi Guys,
I've just had a look at one of my adjustable reamers ! I can't measure any taper on this one at all, it appears to be parallel along its length. So I took a blade out and measured it it does have a taper on the back ! About fifteen thou or so.
I was going to measure it at each end, but dropped it and it shattered into several pieces. However it does have a flat relief behind the cutting edge. Also the blade looks to be more like carbide than HSS, probably explaining why it shattered so easily !
06-02-2022-001.jpg 06-02-2022-002.jpg
These are pictures of the end bit, it was the only bit I found !Best Regards:
Baron J.
-
7th Feb 2022, 10:17 AM #6Golden Member
- Join Date
- Sep 2008
- Location
- Riddells Creek, Vic.
- Posts
- 838
I have often thought of sharpening some of my Sutton expanding reamers but because of the geometry or profile of the cutting edge I always shy away from it. The only way I can describe the shape of profile of the blades is "Barrel Shaped" with the highest point/largest diameter being about 1/3 of the way along the edge.
-
8th Feb 2022, 10:59 PM #7
I finally found something on the geometry of adjustable reamers - on the Narex site:
https://www.narex.tools/en/e-shop-catalog/vystruzniky
Looks like these are indeed parallel across opposing cutting edges. Their pic also shows the sharpening angles:
vystruzniky_vykresy.pngCheers, Joe
retired - less energy, more time to contemplate projects and more shed time....
-
9th Feb 2022, 12:29 PM #8Golden Member
- Join Date
- Oct 2008
- Location
- Cairns, Q
- Posts
- 666
[QUOTE=Techo1;1994432 "Barrel Shaped" with the highest point/largest diameter being about 1/3 of the way along the edge.[/QUOTE]
I remember checking one of mine years ago - blades were as described by Techno 1.
Frank.
-
9th Feb 2022, 05:17 PM #9Most Valued Member
- Join Date
- Nov 2017
- Location
- Geelong, Australia
- Age
- 57
- Posts
- 2,673
-
9th Feb 2022, 06:10 PM #10Diamond Member
- Join Date
- Mar 2014
- Location
- South of Adelaide
- Posts
- 1,229
-
9th Feb 2022, 06:18 PM #11Golden Member
- Join Date
- Sep 2008
- Location
- Riddells Creek, Vic.
- Posts
- 838
-
13th Feb 2022, 05:11 PM #12
At last I have found time to get back to this project, I'm finishing a telescoping gantry project which is taking up most of my time.
I looked at the geometry of my adjustable finger and realized when I moved the fine adjustment screw it rotated the finger horizontally instead of lifting it.
Dumb ass! so I reconfigured it. Its still a pain to set up but it better.
I remounted my reamer and ground a taper on the lower third of the blade, I hope to test it in the next few days.
I have taken more photos as requested.
I hope you can see the finger is located in a V groove which allows it to move back to allow the blade to pass when the reamer is rotated anti-clockwise (Yes the direction depends on which end you view it from.) then it locks back against its stop once the blade has passed.
MarkI've become a tool of my tools.
-
30th Apr 2022, 01:19 AM #13Intermediate Member
- Join Date
- Jun 2020
- Location
- Geelong VIC
- Age
- 67
- Posts
- 25
Keep old skills alive, and good tools live on! BTW I do mine (adj. and m/c reamers) between centers... and after initial full blade grind... pack up the "lead in" end center table mount at the back with shim (12th), and had good results to date. I think on smaller sizes (up to 1/2") the 12th gives a bit to much taper. On the bigger ones is seams ok, as they have a longer blade? One thing I have noticed is the smaller the ream the more critical the "primary clearence and land size" has to be to stop chatter... especially in brass! I have also found you get the best results if you first strip and clean the reamer (adj) and "set" the blades, by turning the reamer backwards in an "on-size" bush, after "nipping" up the collers. Steve.
Similar Threads
-
Reamers
By Simplicity in forum METALWORK GENERALReplies: 21Last Post: 7th Aug 2020, 03:49 PM -
Reamers
By DSEL74 in forum METALWORK GENERALReplies: 3Last Post: 15th Mar 2018, 10:36 PM -
Reamers 101
By morrisman in forum METALWORK GENERALReplies: 19Last Post: 4th Apr 2014, 12:51 AM -
reamers
By welder in forum METALWORK GENERALReplies: 12Last Post: 27th Oct 2011, 10:42 PM