Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
Thread: roof pitch
-
28th Jun 2020, 07:05 PM #16
you may even get some ideas from something like Renovators Forum.
Too dark right now to get good fotos, but between house and garage here pergola has a raised roof, as in on house side roof has been raised above actual height of house. To do this they ran some "SHS" from eaves up around gutter to obtain height. Some flat sheet has be used to seal off gap. If you need some light in may be able to use come clear sheeting instead.
Ok its more involved, but more roof pitch has been achieved and helped make the space more comfortable in Summer. Before this under the laser lite installed by BIL on a shallower pitch was only fit to grow "plants" underneith.Frisky wife, happy life. Then I woke up. Oh well it was fun while it lasted.From an early age my father taught me to wear welding gloves . "Its not to protect your hands son, its to put out the fire when u set yourself alight".
-
29th Jun 2020, 11:53 PM #17Intermediate Member
- Join Date
- May 2006
- Location
- Adelaide
- Age
- 71
- Posts
- 31
roof pitch
thanks jatt!
there will be plenty of height to play with on this project , i'll be lining the walls and making french windows and doors slate floor en suite etc iv'e put the pitch calculator over an existing lean-to and the pitch is 1 degree it has never had any leaks and i may end up with something between one and or one and a half degree. hopefully doing the posts shortly.
kind regards
blockhed
Similar Threads
-
Cutting a 2mm pitch 3/8 acme thread
By m.j.bower.69 in forum THE HERCUS AREAReplies: 15Last Post: 1st Oct 2019, 10:16 PM -
Hercus front oiler thread pitch and dimensions?
By neevo in forum THE HERCUS AREAReplies: 25Last Post: 21st Apr 2014, 01:42 PM -
roof rack
By wooddog in forum WELDINGReplies: 1Last Post: 13th Nov 2010, 06:07 PM -
roof ridge restoration
By HaydnG in forum METALWORK GENERALReplies: 4Last Post: 19th Feb 2007, 03:14 PM