Hi to all.

This is one project that i tought it could
interest some people here.

Originally i made this kind of stool to my workplace.
Its mounted to vise stand like this one that i made to my
homeshop.

It allows you to move easily 270 degrees around
the vise. This i have found specially helpful
when welding pipes and stuff like that.

F95TN4NJH0TM8UA.LARGE.jpg

What makes it so different.. is that it can be used
for supporting long workpieces too.

FZHHNJRJH0TM8ZV.LARGE.jpg
FRNQMH7JH0TM8TX.LARGE.jpg

Here is couple pictures about making:

F4LIPAZJH0TM8UK.LARGE.jpgF4Z5I8HJH0TM8YN.LARGE.jpgFUDXMEMJH0TM8VM.LARGE.jpg
FJP5JAMJH0TM8VS.LARGE.jpgFSDKPSYJH0TM8VU.LARGE.jpg

All bends i made with my diy press.
Welds are done with tig / stick.

Stool opens this way:
FKWGLRWJH0TM8SJ.LARGE.jpgF6APWSZJH0TM8TD.LARGE.jpgF3M3I2VJH0TM8TP.LARGE.jpg

Can be removed easily if need to.
F8PHMVQJH0TO0CX.LARGE.jpg

I have made my worktable from 2x4,
and its mounted to floor. So, its strong enough for 100kg person.

FF5BO5DJH0TM8XO.LARGE.jpg

Here is the video about making it:

https://youtu.be/nWbZSOMt-XM

And instructable with main measures and more info:
https://www.instructables.com/id/Wise-Vise-Bench/

Thank you for checking this.

Tuomas