Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Jun 2021
    Location
    Canberra
    Posts
    8

    Default Another from the ACT

    Hi All,

    I joined a little while ago so I could ask a question in a particular thread. I have a 9x20 that hasn't been a real positive experience and turned me off machining somewhat. Did things other ways even if half an hour on the lathe would have been easier. Due to its issues that 1/2 hour often turned an exercise in frustration. So now retired I bought an AL-346V on the H&F EOF sale, and after waiting for a month to get it delivered and installed I can now ask even more stupid questions. Plus now I might use it to make the 9x20 better, though I now think the motor is crapping out so it may be a lost cause.

    Cheers

    Rob

  2. #2
    Join Date
    Feb 2014
    Location
    Werribee, Melbourne
    Posts
    177

    Default

    Welcome aboard Rob.

  3. #3
    Join Date
    Jan 2004
    Location
    Mackay North Qld
    Posts
    6,446

    Default

    Hi Solera,

    Welcome to the MetalWork Forums.

    To help you explore the other areas of our forum here's a guide on to to navigate our Forum and find all the interesting places.

    Goto the FORUM box in the top left hand cnr of the page and click the down arrow. This will bring up a pull down menu that has Forum Home at the top

    Click Forum Home which will present a scroll down page.

    Our rules,the Terms of Service are right at the top ,we encourage you to read them.

    Below that are all the various areas and sub forums that make up out MetalWork forums.


    Welcome

    Grahame

  4. #4
    Join Date
    May 2013
    Location
    Rockhampton, QLD
    Age
    68
    Posts
    454

    Default

    Welcome to the forum Rob.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •