Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Another from the ACT
-
29th Jul 2021, 07:21 PM #1New Member
- Join Date
- Jun 2021
- Location
- Canberra
- Posts
- 8
Another from the ACT
Hi All,
I joined a little while ago so I could ask a question in a particular thread. I have a 9x20 that hasn't been a real positive experience and turned me off machining somewhat. Did things other ways even if half an hour on the lathe would have been easier. Due to its issues that 1/2 hour often turned an exercise in frustration. So now retired I bought an AL-346V on the H&F EOF sale, and after waiting for a month to get it delivered and installed I can now ask even more stupid questions. Plus now I might use it to make the 9x20 better, though I now think the motor is crapping out so it may be a lost cause.
Cheers
Rob
-
29th Jul 2021, 10:58 PM #2Senior Member
- Join Date
- Feb 2014
- Location
- Werribee, Melbourne
- Posts
- 178
Welcome aboard Rob.
-
29th Jul 2021, 11:37 PM #3
Hi Solera,
Welcome to the MetalWork Forums.
To help you explore the other areas of our forum here's a guide on to to navigate our Forum and find all the interesting places.
Goto the FORUM box in the top left hand cnr of the page and click the down arrow. This will bring up a pull down menu that has Forum Home at the top
Click Forum Home which will present a scroll down page.
Our rules,the Terms of Service are right at the top ,we encourage you to read them.
Below that are all the various areas and sub forums that make up out MetalWork forums.
Welcome
Grahame
-
30th Jul 2021, 06:37 PM #4Senior Member
- Join Date
- May 2013
- Location
- Rockhampton, QLD
- Age
- 68
- Posts
- 455
Welcome to the forum Rob.