Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: G'day from Belgium
-
28th Nov 2020, 12:59 AM #1New Member
- Join Date
- Nov 2020
- Location
- Belgium
- Posts
- 6
G'day from Belgium
Heya
I recently discovered the wookworkforum and while going through some post, I noticed the shortcut the the metal forum.
I'm an amateur woodworker and except some basics in metal working, I don't know that much.
I discover and learn every day things about metal but I have the feeling it's way more complicated learning (in comparison with woodworking) if you haven't had any training/teachings on this matter.
I have some precise questions that I will adress in the forum hoping that someone would help out.
Cheers
-
28th Nov 2020, 06:17 AM #2
Gidday Xhinsy,
A big welcome to our Metalwork Forums. There are a wide range of helpful members here and good blokes they are, too.
We have a large range of subforums related to metalworking which can be perused by going to the rectangular FORUM box in the top left hand corner of the page.
Click on the tiny arrow within that box and a scroll down menu will appear.
Select Forum Home on the top of the scroll down menu and a page will appear which you can scroll down to see the sub forums .
While there I recommend you read the TOUs, the Terms Of Use which are the rules we operate under.
We look forward to seeing your posts.
Welcome
Grahame
Moderator
-
1st Dec 2020, 05:47 PM #3Senior Member
- Join Date
- May 2013
- Location
- Rockhampton, QLD
- Age
- 68
- Posts
- 455
Welcome to the forum.